aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--docs/kde-module/KDEInstallDirs5.rst1
-rw-r--r--docs/kde-module/KDEInstallDirs6.rst1
-rw-r--r--kde-modules/KDEInstallDirs.cmake732
-rw-r--r--kde-modules/KDEInstallDirs5.cmake356
-rw-r--r--kde-modules/KDEInstallDirs6.cmake332
-rw-r--r--kde-modules/KDEInstallDirsCommon.cmake392
-rw-r--r--kde-modules/KDESetupPrefixScript.cmake27
-rw-r--r--modules/QtVersionOption.cmake38
8 files changed, 1152 insertions, 727 deletions
diff --git a/docs/kde-module/KDEInstallDirs5.rst b/docs/kde-module/KDEInstallDirs5.rst
new file mode 100644
index 00000000..4d446f07
--- /dev/null
+++ b/docs/kde-module/KDEInstallDirs5.rst
@@ -0,0 +1 @@
+.. ecm-module:: ../../kde-modules/KDEInstallDirs5.cmake
diff --git a/docs/kde-module/KDEInstallDirs6.rst b/docs/kde-module/KDEInstallDirs6.rst
new file mode 100644
index 00000000..db40cdde
--- /dev/null
+++ b/docs/kde-module/KDEInstallDirs6.rst
@@ -0,0 +1 @@
+.. ecm-module:: ../../kde-modules/KDEInstallDirs6.cmake
diff --git a/kde-modules/KDEInstallDirs.cmake b/kde-modules/KDEInstallDirs.cmake
index 5b11a424..5dbf97d9 100644
--- a/kde-modules/KDEInstallDirs.cmake
+++ b/kde-modules/KDEInstallDirs.cmake
@@ -1,9 +1,4 @@
-# SPDX-FileCopyrightText: 2014-2015 Alex Merry <alex.merry@kde.org>
-# SPDX-FileCopyrightText: 2013 Stephen Kelly <steveire@gmail.com>
-# SPDX-FileCopyrightText: 2012 David Faure <faure@kde.org>
-# SPDX-FileCopyrightText: 2007 Matthias Kretz <kretz@kde.org>
-# SPDX-FileCopyrightText: 2006-2007 Laurent Montel <montel@kde.org>
-# SPDX-FileCopyrightText: 2006-2013 Alex Neundorf <neundorf@kde.org>
+# SPDX-FileCopyrightText: 2021 Volker Krause <vkrause@kde.org>
#
# SPDX-License-Identifier: BSD-3-Clause
@@ -11,727 +6,10 @@
KDEInstallDirs
--------------
-Define KDE standard installation directories.
+Compatibility wrapper around KDEInstallDirs5.
-Note that none of the variables defined by this module provide any
-information about the location of already-installed KDE software.
-
-Also sets ``CMAKE_INSTALL_PREFIX`` to the installation prefix of ECM,
-unless that variable has been already explicitly set by something else
-(since 5.61 and with CMake >= 3.7).
-
-Inclusion of this module defines the following variables:
-
-``KDE_INSTALL_<dir>``
- destination for files of a given type
-``KDE_INSTALL_FULL_<dir>``
- corresponding absolute path
-
-where ``<dir>`` is one of (default values in parentheses and alternative,
-deprecated variable name in square brackets):
-
-``BUNDLEDIR``
- application bundles (``/Applications/KDE``) [``BUNDLE_INSTALL_DIR``]
-``EXECROOTDIR``
- executables and libraries (``<empty>``) [``EXEC_INSTALL_PREFIX``]
-``BINDIR``
- user executables (``EXECROOTDIR/bin``) [``BIN_INSTALL_DIR``]
-``SBINDIR``
- system admin executables (``EXECROOTDIR/sbin``) [``SBIN_INSTALL_DIR``]
-``LIBDIR``
- object code libraries (``EXECROOTDIR/lib``, ``EXECROOTDIR/lib64`` or
- ``EXECROOTDIR/lib/<multiarch-tuple`` on Debian) [``LIB_INSTALL_DIR``]
-``LIBEXECDIR``
- executables for internal use by programs and libraries (``BINDIR`` on
- Windows, ``LIBDIR/libexec`` otherwise) [``LIBEXEC_INSTALL_DIR``]
-``CMAKEPACKAGEDIR``
- CMake packages, including config files (``LIBDIR/cmake``)
- [``CMAKECONFIG_INSTALL_PREFIX``]
-``QTPLUGINDIR``
- Qt plugins (``LIBDIR/plugins`` or qmake-qt5's ``QT_INSTALL_PLUGINS``) [``QT_PLUGIN_INSTALL_DIR``]
-``PLUGINDIR``
- Plugins (``QTPLUGINDIR``) [``PLUGIN_INSTALL_DIR``]
-``QTQUICKIMPORTSDIR``
- QtQuick1 imports (``QTPLUGINDIR/imports`` or qmake-qt5's ``QT_INSTALL_IMPORTS``) [``IMPORTS_INSTALL_DIR``]
-``QMLDIR``
- QtQuick2 imports (``LIBDIR/qml`` or qmake-qt5's ``QT_INSTALL_QML``) [``QML_INSTALL_DIR``]
-``INCLUDEDIR``
- C and C++ header files (``include``) [``INCLUDE_INSTALL_DIR``]
-``LOCALSTATEDIR``
- modifiable single-machine data (``var``)
-``SHAREDSTATEDIR``
- modifiable architecture-independent data (``com``)
-``DATAROOTDIR``
- read-only architecture-independent data root (``share``)
- [``SHARE_INSTALL_PREFIX``]
-``DATADIR``
- read-only architecture-independent data (``DATAROOTDIR``)
- [``DATA_INSTALL_DIR``]
-``DOCBUNDLEDIR``
- documentation bundles generated using kdoctools
- (``DATAROOTDIR/doc/HTML``) [``HTML_INSTALL_DIR``]
-``KCFGDIR``
- kconfig description files (``DATAROOTDIR/config.kcfg``)
- [``KCFG_INSTALL_DIR``]
-``KCONFUPDATEDIR``
- kconf_update scripts (``DATAROOTDIR/kconf_update``)
- [``KCONF_UPDATE_INSTALL_DIR``]
-``KSERVICES5DIR``
- services for KDE Frameworks 5 (``DATAROOTDIR/kservices5``)
- [``SERVICES_INSTALL_DIR``]
-``KSERVICETYPES5DIR``
- service types for KDE Frameworks 5 (``DATAROOTDIR/kservicetypes5``)
- [``SERVICETYPES_INSTALL_DIR``]
-``KXMLGUI5DIR``
- knotify description files (``DATAROOTDIR/kxmlgui5``)
- [``KXMLGUI_INSTALL_DIR``]
-``KTEMPLATESDIR``
- Kapptemplate and Kdevelop templates (``kdevappwizard/templates``)
-``KNOTIFY5RCDIR``
- knotify description files (``DATAROOTDIR/knotifications5``)
- [``KNOTIFYRC_INSTALL_DIR``]
-``ICONDIR``
- icons (``DATAROOTDIR/icons``) [``ICON_INSTALL_DIR``]
-``LOCALEDIR``
- knotify description files (``DATAROOTDIR/locale``)
- [``LOCALE_INSTALL_DIR``]
-``SOUNDDIR``
- sound files (``DATAROOTDIR/sounds``) [``SOUND_INSTALL_DIR``]
-``TEMPLATEDIR``
- templates (``DATAROOTDIR/templates``) [``TEMPLATES_INSTALL_DIR``]
-``WALLPAPERDIR``
- desktop wallpaper images (``DATAROOTDIR/wallpapers``)
- [``WALLPAPER_INSTALL_DIR``]
-``APPDIR``
- application desktop files (``DATAROOTDIR/applications``) Since 1.1.0.
- [``XDG_APPS_INSTALL_DIR``]
-``DESKTOPDIR``
- desktop directories (``DATAROOTDIR/desktop-directories``)
- [``XDG_DIRECTORY_INSTALL_DIR``]
-``MIMEDIR``
- mime description files (``DATAROOTDIR/mime/packages``)
- [``XDG_MIME_INSTALL_DIR``]
-``METAINFODIR``
- AppStream component metadata files (``DATAROOTDIR/metainfo``)
-``QTQCHDIR``
- documentation bundles in QCH format for Qt-extending libraries (``DATAROOTDIR/doc/qch`` or qmake-qt5's ``QT_INSTALL_DOCS``) Since 5.36.0.
-``QCHDIR``
- documentation bundles in QCH format (``DATAROOTDIR/doc/qch``) Since 5.36.0.
-``MANDIR``
- man documentation (``DATAROOTDIR/man``) [``MAN_INSTALL_DIR``]
-``INFODIR``
- info documentation (``DATAROOTDIR/info``)
-``DBUSDIR``
- D-Bus (``DATAROOTDIR/dbus-1``)
-``DBUSINTERFACEDIR``
- D-Bus interfaces (``DBUSDIR/interfaces``)
- [``DBUS_INTERFACES_INSTALL_DIR``]
-``DBUSSERVICEDIR``
- D-Bus session services (``DBUSDIR/services``)
- [``DBUS_SERVICES_INSTALL_DIR``]
-``DBUSSYSTEMSERVICEDIR``
- D-Bus system services (``DBUSDIR/system-services``)
- [``DBUS_SYSTEM_SERVICES_INSTALL_DIR``]
-``SYSCONFDIR``
- read-only single-machine data
- (``etc``, or ``/etc`` if ``CMAKE_INSTALL_PREFIX`` is ``/usr``)
- [``SYSCONF_INSTALL_DIR``]
-``CONFDIR``
- application configuration files (``SYSCONFDIR/xdg``)
- [``CONFIG_INSTALL_DIR``]
-``AUTOSTARTDIR``
- autostart files (``CONFDIR/autostart``) [``AUTOSTART_INSTALL_DIR``]
-``LOGGINGCATEGORIESDIR``
- Qt logging categories files directory (``DATAROOTDIR/qlogging-categories5``) Since 5.59.0
-``JARDIR``
- Java AAR/JAR files for Android. Since 5.62.0
-``SYSTEMDUNITDIR``
- Systemd Units (``lib/systemd``)
- [``SYSTEMD_UNIT_INSTALL_DIR``]. Since 5.65
-``SYSTEMDUSERUNITDIR``
- Systemd User Units (``lib/systemd/user``)
- [``SYSTEMD_USER_UNIT_INSTALL_DIR``]. Since 5.65
-
-If ``KDE_INSTALL_USE_QT_SYS_PATHS`` is set to TRUE before including this
-module, the default values for some variables are instead queried from
-Qt5's qmake (where mentioned in the parentheses above).
-If not set, it will default to TRUE if Qt5's qmake is found and
-it's ``QT_INSTALL_PREFIX`` is the same as ``CMAKE_INSTALL_PREFIX``,
-otherwise default to FALSE.
-This variable should NOT be set from within CMakeLists.txt files, instead
-is intended to be set manually when configuring a project which uses
-KDEInstallDirs (e.g. by packagers).
-
-If ``KDE_INSTALL_DIRS_NO_DEPRECATED`` is set to TRUE before including this
-module, the deprecated variables (listed in the square brackets above) are
-not defined.
-
-In addition, for each ``KDE_INSTALL_*`` variable, an equivalent
-``CMAKE_INSTALL_*`` variable is defined. If
-``KDE_INSTALL_DIRS_NO_DEPRECATED`` is set to TRUE, only those variables
-defined by the ``GNUInstallDirs`` module (shipped with CMake) are defined.
-If ``KDE_INSTALL_DIRS_NO_CMAKE_VARIABLES`` is set to TRUE, no variables with
-a ``CMAKE_`` prefix will be defined by this module (other than
-CMAKE_INSTALL_DEFAULT_COMPONENT_NAME - see below).
-
-The ``KDE_INSTALL_<dir>`` variables (or their ``CMAKE_INSTALL_<dir>`` or
-deprecated counterparts) may be passed to the DESTINATION options of
-``install()`` commands for the corresponding file type. They are set in the
-CMake cache, and so the defaults above can be overridden by users.
-
-Note that the ``KDE_INSTALL_<dir>``, ``CMAKE_INSTALL_<dir>`` or deprecated
-form of the variable can be changed using CMake command line variable
-definitions; in either case, all forms of the variable will be affected. The
-effect of passing multiple forms of the same variable on the command line
-(such as ``KDE_INSTALL_BINDIR`` and ``CMAKE_INSTALL_BINDIR`` is undefined.
-
-The variable ``KDE_INSTALL_TARGETS_DEFAULT_ARGS`` is also defined (along with
-the deprecated form ``INSTALL_TARGETS_DEFAULT_ARGS``). This should be used
-when libraries or user-executable applications are installed, in the
-following manner:
-
-.. code-block:: cmake
-
- install(TARGETS mylib myapp ${KDE_INSTALL_TARGETS_DEFAULT_ARGS})
-
-It MUST NOT be used for installing plugins, system admin executables or
-executables only intended for use internally by other code. Those should use
-``KDE_INSTALL_PLUGINDIR``, ``KDE_INSTALL_SBINDIR`` or
-``KDE_INSTALL_LIBEXECDIR`` respectively.
-
-Additionally, ``CMAKE_INSTALL_DEFAULT_COMPONENT_NAME`` will be set to
-``${PROJECT_NAME}`` to provide a sensible default for this CMake option.
-
-Note that mixing absolute and relative paths, particularly for ``BINDIR``,
-``LIBDIR`` and ``INCLUDEDIR``, can cause issues with exported targets. Given
-that the default values for these are relative paths, relative paths should
-be used on the command line when possible (eg: use
-``-DKDE_INSTALL_LIBDIR=lib64`` instead of
-``-DKDE_INSTALL_LIBDIR=/usr/lib/lib64`` to override the library directory).
-
-Since pre-1.0.0.
-
-NB: The variables starting ``KDE_INSTALL_`` are available since 1.6.0,
-unless otherwise noted with the variable.
-
-The ``KDE_INSTALL_PREFIX_SCRIPT`` option will install a ${CMAKE_INSTALL_PREFIX}/prefix.sh
-file that allows to easily incorporate the necessary environment variables
-for the prefix into a process.
+Since 5.82.0, prior to that equivalent to KDEInstallDirs5.
#]=======================================================================]
-# Figure out what the default install directory for libraries should be.
-# This is based on the logic in GNUInstallDirs, but simplified (the
-# GNUInstallDirs code deals with re-configuring, but that is dealt with
-# by the _define_* macros in this module).
-set(_LIBDIR_DEFAULT "lib")
-# Override this default 'lib' with 'lib64' if:
-# - we are on a Linux, kFreeBSD or Hurd system but NOT cross-compiling
-# - we are NOT on debian
-# - we are NOT on flatpak
-# - we are on a 64 bits system
-# reason is: amd64 ABI: http://www.x86-64.org/documentation/abi.pdf
-# For Debian with multiarch, use 'lib/${CMAKE_LIBRARY_ARCHITECTURE}' if
-# CMAKE_LIBRARY_ARCHITECTURE is set (which contains e.g. "i386-linux-gnu"
-# See https://wiki.debian.org/Multiarch
-if((CMAKE_SYSTEM_NAME MATCHES "Linux|kFreeBSD" OR CMAKE_SYSTEM_NAME STREQUAL "GNU")
- AND NOT CMAKE_CROSSCOMPILING
- AND NOT EXISTS "/etc/arch-release"
- AND NOT DEFINED ENV{FLATPAK_ID})
- if (EXISTS "/etc/debian_version") # is this a debian system ?
- if(CMAKE_LIBRARY_ARCHITECTURE)
- set(_LIBDIR_DEFAULT "lib/${CMAKE_LIBRARY_ARCHITECTURE}")
- endif()
- else() # not debian, rely on CMAKE_SIZEOF_VOID_P:
- if(NOT DEFINED CMAKE_SIZEOF_VOID_P)
- message(AUTHOR_WARNING
- "Unable to determine default LIB_INSTALL_LIBDIR directory because no target architecture is known. "
- "Please enable at least one language before including KDEInstallDirs.")
- else()
- if("${CMAKE_SIZEOF_VOID_P}" EQUAL "8")
- set(_LIBDIR_DEFAULT "lib64")
- endif()
- endif()
- endif()
-endif()
-
-set(_gnu_install_dirs_vars
- BINDIR
- SBINDIR
- LIBEXECDIR
- SYSCONFDIR
- SHAREDSTATEDIR
- LOCALSTATEDIR
- LIBDIR
- INCLUDEDIR
- OLDINCLUDEDIR
- DATAROOTDIR
- DATADIR
- INFODIR
- LOCALEDIR
- MANDIR
- DOCDIR)
-
-# Macro for variables that are relative to another variable. We store an empty
-# value in the cache (for documentation/GUI cache editor purposes), and store
-# the default value in a local variable. If the cache variable is ever set to
-# something non-empty, the local variable will no longer be set. However, if
-# the cache variable remains (or is set to be) empty, the value will be
-# relative to that of the parent variable.
-#
-# varname: the variable name suffix (eg: BINDIR for KDE_INSTALL_BINDIR)
-# parent: the variable suffix of the variable this is relative to
-# (eg: DATAROOTDIR for KDE_INSTALL_DATAROOTDIR)
-# subdir: the path of the default value of KDE_INSTALL_${varname}
-# relative to KDE_INSTALL_${parent}: no leading /
-# docstring: documentation about the variable (not including the default value)
-# oldstylename (optional): the old-style name of the variable
-macro(_define_relative varname parent subdir docstring)
- set(_oldstylename)
- if(NOT KDE_INSTALL_DIRS_NO_DEPRECATED AND ${ARGC} GREATER 4)
- set(_oldstylename "${ARGV4}")
- endif()
- set(_cmakename)
- if(NOT KDE_INSTALL_DIRS_NO_CMAKE_VARIABLES)
- list(FIND _gnu_install_dirs_vars "${varname}" _list_offset)
- set(_cmakename_is_deprecated FALSE)
- if(NOT KDE_INSTALL_DIRS_NO_DEPRECATED OR NOT _list_offset EQUAL -1)
- set(_cmakename CMAKE_INSTALL_${varname})
- if(_list_offset EQUAL -1)
- set(_cmakename_is_deprecated TRUE)
- endif()
- endif()
- endif()
-
- # Surprisingly complex logic to deal with joining paths.
- # Note that we cannot use arg vars directly in if() because macro args are
- # not proper variables.
- set(_parent "${parent}")
- set(_subdir "${subdir}")
- if(_parent AND _subdir)
- set(_docpath "${_parent}/${_subdir}")
- if(KDE_INSTALL_${_parent})
- set(_realpath "${KDE_INSTALL_${_parent}}/${_subdir}")
- else()
- set(_realpath "${_subdir}")
- endif()
- elseif(_parent)
- set(_docpath "${_parent}")
- set(_realpath "${KDE_INSTALL_${_parent}}")
- else()
- set(_docpath "${_subdir}")
- set(_realpath "${_subdir}")
- endif()
-
- if(KDE_INSTALL_${varname})
- # make sure the cache documentation is set correctly
- get_property(_iscached CACHE KDE_INSTALL_${varname} PROPERTY VALUE SET)
- if (_iscached)
- # make sure the docs are still set if it was passed on the command line
- set_property(CACHE KDE_INSTALL_${varname}
- PROPERTY HELPSTRING "${docstring} (${_docpath})")
- # make sure the type is correct if it was passed on the command line
- set_property(CACHE KDE_INSTALL_${varname}
- PROPERTY TYPE PATH)
- endif()
- elseif(${_oldstylename})
- message(DEPRECATION "${_oldstylename} is deprecated, use KDE_INSTALL_${varname} instead.")
- # The old name was given (probably on the command line): move
- # it to the new name
- set(KDE_INSTALL_${varname} "${${_oldstylename}}"
- CACHE PATH
- "${docstring} (${_docpath})"
- FORCE)
- elseif(${_cmakename})
- if(_cmakename_is_deprecated)
- message(DEPRECATION "${_cmakename} is deprecated, use KDE_INSTALL_${varname} instead.")
- endif()
- # The CMAKE_ name was given (probably on the command line): move
- # it to the new name
- set(KDE_INSTALL_${varname} "${${_cmakename}}"
- CACHE PATH
- "${docstring} (${_docpath})"
- FORCE)
- else()
- # insert an empty value into the cache, indicating the default
- # should be used (including compatibility vars above)
- set(KDE_INSTALL_${varname} ""
- CACHE PATH "${docstring} (${_docpath})")
- set(KDE_INSTALL_${varname} "${_realpath}")
- endif()
-
- mark_as_advanced(KDE_INSTALL_${varname})
-
- if(NOT IS_ABSOLUTE ${KDE_INSTALL_${varname}})
- set(KDE_INSTALL_FULL_${varname}
- "${CMAKE_INSTALL_PREFIX}/${KDE_INSTALL_${varname}}")
- else()
- set(KDE_INSTALL_FULL_${varname} "${KDE_INSTALL_${varname}}")
- endif()
-
- # Override compatibility vars at runtime, even though we don't touch
- # them in the cache; this way, we keep the variables in sync where
- # KDEInstallDirs is included, but don't interfere with, say,
- # GNUInstallDirs in a parallel part of the CMake tree.
- if(_cmakename)
- set(${_cmakename} "${KDE_INSTALL_${varname}}")
- set(CMAKE_INSTALL_FULL_${varname} "${KDE_INSTALL_FULL_${varname}}")
- endif()
-
- if(_oldstylename)
- set(${_oldstylename} "${KDE_INSTALL_${varname}}")
- endif()
-endmacro()
-
-# varname: the variable name suffix (eg: BINDIR for KDE_INSTALL_BINDIR)
-# dir: the relative path of the default value of KDE_INSTALL_${varname}
-# relative to CMAKE_INSTALL_PREFIX: no leading /
-# docstring: documentation about the variable (not including the default value)
-# oldstylename (optional): the old-style name of the variable
-macro(_define_absolute varname dir docstring)
- _define_relative("${varname}" "" "${dir}" "${docstring}" ${ARGN})
-endmacro()
-
-macro(_define_non_cache varname value)
- set(KDE_INSTALL_${varname} "${value}")
- if(NOT IS_ABSOLUTE ${KDE_INSTALL_${varname}})
- set(KDE_INSTALL_FULL_${varname}
- "${CMAKE_INSTALL_PREFIX}/${KDE_INSTALL_${varname}}")
- else()
- set(KDE_INSTALL_FULL_${varname} "${KDE_INSTALL_${varname}}")
- endif()
-
- if(NOT KDE_INSTALL_DIRS_NO_CMAKE_VARIABLES)
- list(FIND _gnu_install_dirs_vars "${varname}" _list_offset)
- if(NOT KDE_INSTALL_DIRS_NO_DEPRECATED OR NOT _list_offset EQUAL -1)
- set(CMAKE_INSTALL_${varname} "${KDE_INSTALL_${varname}}")
- set(CMAKE_INSTALL_FULL_${varname} "${KDE_INSTALL_FULL_${varname}}")
- endif()
- endif()
-endmacro()
-
-if(APPLE)
- _define_absolute(BUNDLEDIR "/Applications/KDE"
- "application bundles"
- BUNDLE_INSTALL_DIR)
-endif()
-
-if(CMAKE_INSTALL_PREFIX_INITIALIZED_TO_DEFAULT)
- set(CMAKE_INSTALL_PREFIX "${ECM_PREFIX}" CACHE PATH "Install path prefix" FORCE)
-endif()
-
-_define_absolute(EXECROOTDIR ""
- "executables and libraries"
- EXEC_INSTALL_PREFIX)
-
-_define_relative(BINDIR EXECROOTDIR "bin"
- "user executables"
- BIN_INSTALL_DIR)
-_define_relative(SBINDIR EXECROOTDIR "sbin"
- "system admin executables"
- SBIN_INSTALL_DIR)
-_define_relative(LIBDIR EXECROOTDIR "${_LIBDIR_DEFAULT}"
- "object code libraries"
- LIB_INSTALL_DIR)
-
-if(WIN32)
- _define_relative(LIBEXECDIR BINDIR ""
- "executables for internal use by programs and libraries"
- LIBEXEC_INSTALL_DIR)
- _define_non_cache(LIBEXECDIR_KF5 "${CMAKE_INSTALL_LIBEXECDIR}")
-else()
- _define_relative(LIBEXECDIR LIBDIR "libexec"
- "executables for internal use by programs and libraries"
- LIBEXEC_INSTALL_DIR)
- _define_non_cache(LIBEXECDIR_KF5 "${CMAKE_INSTALL_LIBEXECDIR}/kf5")
-endif()
-if(NOT KDE_INSTALL_DIRS_NO_DEPRECATED)
- set(KF5_LIBEXEC_INSTALL_DIR "${CMAKE_INSTALL_LIBEXECDIR_KF5}")
-endif()
-_define_relative(CMAKEPACKAGEDIR LIBDIR "cmake"
- "CMake packages, including config files"
- CMAKECONFIG_INSTALL_PREFIX)
-
-include("${ECM_MODULE_DIR}/ECMQueryQmake.cmake")
-
-set(_default_KDE_INSTALL_USE_QT_SYS_PATHS OFF)
-if(NOT DEFINED KDE_INSTALL_USE_QT_SYS_PATHS)
- query_qmake(qt_install_prefix_dir QT_INSTALL_PREFIX TRY)
- if(qt_install_prefix_dir STREQUAL "${CMAKE_INSTALL_PREFIX}")
- message(STATUS "Installing in the same prefix as Qt, adopting their path scheme.")
- set(_default_KDE_INSTALL_USE_QT_SYS_PATHS ON)
- endif()
-endif()
-
-option (KDE_INSTALL_USE_QT_SYS_PATHS "Install mkspecs files, QCH files for Qt-based libs, Plugins and Imports to the Qt 5 install dir" "${_default_KDE_INSTALL_USE_QT_SYS_PATHS}")
-if(KDE_INSTALL_USE_QT_SYS_PATHS)
- # Qt-specific vars
- query_qmake(qt_install_prefix_dir QT_INSTALL_PREFIX TRY)
- query_qmake(qt_plugins_dir QT_INSTALL_PLUGINS)
-
- if(qt_install_prefix_dir STREQUAL "${CMAKE_INSTALL_PREFIX}")
- file(RELATIVE_PATH qt_plugins_dir ${qt_install_prefix_dir} ${qt_plugins_dir})
- endif()
- _define_absolute(QTPLUGINDIR ${qt_plugins_dir}
- "Qt plugins"
- QT_PLUGIN_INSTALL_DIR)
-
- query_qmake(qt_imports_dir QT_INSTALL_IMPORTS)
-
- if(qt_install_prefix_dir STREQUAL "${CMAKE_INSTALL_PREFIX}")
- file(RELATIVE_PATH qt_imports_dir ${qt_install_prefix_dir} ${qt_imports_dir})
- endif()
- _define_absolute(QTQUICKIMPORTSDIR ${qt_imports_dir}
- "QtQuick1 imports"
- IMPORTS_INSTALL_DIR)
-
- query_qmake(qt_qml_dir QT_INSTALL_QML)
-
- if(qt_install_prefix_dir STREQUAL "${CMAKE_INSTALL_PREFIX}")
- file(RELATIVE_PATH qt_qml_dir ${qt_install_prefix_dir} ${qt_qml_dir})
- endif()
- _define_absolute(QMLDIR ${qt_qml_dir}
- "QtQuick2 imports"
- QML_INSTALL_DIR)
-else()
- set(_pluginsDirParent LIBDIR)
- if (ANDROID)
- set(_pluginsDirParent)
- #androiddeployqt wants plugins right in the prefix
- endif()
- _define_relative(QTPLUGINDIR "${_pluginsDirParent}" "plugins"
- "Qt plugins"
- QT_PLUGIN_INSTALL_DIR)
-
- _define_relative(QTQUICKIMPORTSDIR QTPLUGINDIR "imports"
- "QtQuick1 imports"
- IMPORTS_INSTALL_DIR)
-
- _define_relative(QMLDIR LIBDIR "qml"
- "QtQuick2 imports"
- QML_INSTALL_DIR)
-endif()
-
-_define_relative(PLUGINDIR QTPLUGINDIR ""
- "Plugins"
- PLUGIN_INSTALL_DIR)
-
-_define_absolute(INCLUDEDIR "include"
- "C and C++ header files"
- INCLUDE_INSTALL_DIR)
-_define_non_cache(INCLUDEDIR_KF5 "${CMAKE_INSTALL_INCLUDEDIR}/KF5")
-if(NOT KDE_INSTALL_DIRS_NO_DEPRECATED)
- set(KF5_INCLUDE_INSTALL_DIR "${CMAKE_INSTALL_INCLUDEDIR_KF5}")
-endif()
-
-_define_absolute(LOCALSTATEDIR "var"
- "modifiable single-machine data")
-
-_define_absolute(SHAREDSTATEDIR "com"
- "modifiable architecture-independent data")
-
-
-
-if (WIN32)
- _define_relative(DATAROOTDIR BINDIR "data"
- "read-only architecture-independent data root"
- SHARE_INSTALL_PREFIX)
-else()
- _define_absolute(DATAROOTDIR "share"
- "read-only architecture-independent data root"
- SHARE_INSTALL_PREFIX)
-endif()
-
-_define_relative(DATADIR DATAROOTDIR ""
- "read-only architecture-independent data"
- DATA_INSTALL_DIR)
-_define_non_cache(DATADIR_KF5 "${CMAKE_INSTALL_DATADIR}/kf5")
-if(NOT KDE_INSTALL_DIRS_NO_DEPRECATED)
- set(KF5_DATA_INSTALL_DIR "${CMAKE_INSTALL_DATADIR_KF5}")
-endif()
-
-# Qt-specific data vars
-if(KDE_INSTALL_USE_QT_SYS_PATHS)
- query_qmake(qt_docs_dir QT_INSTALL_DOCS)
-
- _define_absolute(QTQCHDIR ${qt_docs_dir}
- "documentation bundles in QCH format for Qt-extending libraries")
-else()
- _define_relative(QTQCHDIR DATAROOTDIR "doc/qch"
- "documentation bundles in QCH format for Qt-extending libraries")
-endif()
-
-
-# KDE Framework-specific things
-_define_relative(DOCBUNDLEDIR DATAROOTDIR "doc/HTML"
- "documentation bundles generated using kdoctools"
- HTML_INSTALL_DIR)
-_define_relative(KCFGDIR DATAROOTDIR "config.kcfg"
- "kconfig description files"
- KCFG_INSTALL_DIR)
-_define_relative(KCONFUPDATEDIR DATAROOTDIR "kconf_update"
- "kconf_update scripts"
- KCONF_UPDATE_INSTALL_DIR)
-_define_relative(KSERVICES5DIR DATAROOTDIR "kservices5"
- "services for KDE Frameworks 5"
- SERVICES_INSTALL_DIR)
-_define_relative(KSERVICETYPES5DIR DATAROOTDIR "kservicetypes5"
- "service types for KDE Frameworks 5"
- SERVICETYPES_INSTALL_DIR)
-_define_relative(KNOTIFY5RCDIR DATAROOTDIR "knotifications5"
- "knotify description files"
- KNOTIFYRC_INSTALL_DIR)
-_define_relative(KXMLGUI5DIR DATAROOTDIR "kxmlgui5"
- "kxmlgui .rc files"
- KXMLGUI_INSTALL_DIR)
-_define_relative(KAPPTEMPLATESDIR DATAROOTDIR "kdevappwizard/templates"
- "KAppTemplate and KDevelop templates"
- KDE_INSTALL_KTEMPLATESDIR
- )
-_define_relative(KFILETEMPLATESDIR DATAROOTDIR "kdevfiletemplates/templates"
- "KDevelop file templates")
-_define_relative(LOGGINGCATEGORIESDIR DATAROOTDIR "qlogging-categories5"
- "Qt Logging categories files")
-_define_relative(JARDIR "" "jar"
- "Java AAR/JAR files for Android")
-
-# Cross-desktop or other system things
-_define_relative(ICONDIR DATAROOTDIR "icons"
- "icons"
- ICON_INSTALL_DIR)
-_define_relative(LOCALEDIR DATAROOTDIR "locale"
- "knotify description files"
- LOCALE_INSTALL_DIR)
-_define_relative(SOUNDDIR DATAROOTDIR "sounds"
- "sound files"
- SOUND_INSTALL_DIR)
-_define_relative(TEMPLATEDIR DATAROOTDIR "templates"
- "templates"
- TEMPLATES_INSTALL_DIR)
-_define_relative(WALLPAPERDIR DATAROOTDIR "wallpapers"
- "desktop wallpaper images"
- WALLPAPER_INSTALL_DIR)
-_define_relative(APPDIR DATAROOTDIR "applications"
- "application desktop files"
- XDG_APPS_INSTALL_DIR)
-_define_relative(DESKTOPDIR DATAROOTDIR "desktop-directories"
- "desktop directories"
- XDG_DIRECTORY_INSTALL_DIR)
-_define_relative(MIMEDIR DATAROOTDIR "mime/packages"
- "mime description files"
- XDG_MIME_INSTALL_DIR)
-_define_relative(METAINFODIR DATAROOTDIR "metainfo"
- "AppStream component metadata")
-_define_relative(QCHDIR DATAROOTDIR "doc/qch"
- "documentation bundles in QCH format")
-_define_relative(MANDIR DATAROOTDIR "man"
- "man documentation"
- MAN_INSTALL_DIR)
-_define_relative(INFODIR DATAROOTDIR "info"
- "info documentation")
-_define_relative(DBUSDIR DATAROOTDIR "dbus-1"
- "D-Bus")
-_define_relative(DBUSINTERFACEDIR DBUSDIR "interfaces"
- "D-Bus interfaces"
- DBUS_INTERFACES_INSTALL_DIR)
-_define_relative(DBUSSERVICEDIR DBUSDIR "services"
- "D-Bus session services"
- DBUS_SERVICES_INSTALL_DIR)
-_define_relative(DBUSSYSTEMSERVICEDIR DBUSDIR "system-services"
- "D-Bus system services"
- DBUS_SYSTEM_SERVICES_INSTALL_DIR)
-_define_relative(SYSTEMDUNITDIR CMAKE_INSTALL_PREFIX "lib/systemd"
- "Systemd units"
- SYSTEMD_UNIT_INSTALL_DIR)
-_define_relative(SYSTEMDUSERUNITDIR SYSTEMDUNITDIR "user"
- "Systemd user units"
- SYSTEMD_USER_UNIT_INSTALL_DIR)
-
-
-set(_default_sysconf_dir "etc")
-if (CMAKE_INSTALL_PREFIX STREQUAL "/usr")
- set(_default_sysconf_dir "/etc")
-endif()
-
-
-_define_absolute(SYSCONFDIR "${_default_sysconf_dir}"
- "read-only single-machine data"
- SYSCONF_INSTALL_DIR)
-_define_relative(CONFDIR SYSCONFDIR "xdg"
- "application configuration files"
- CONFIG_INSTALL_DIR)
-_define_relative(AUTOSTARTDIR CONFDIR "autostart"
- "autostart files"
- AUTOSTART_INSTALL_DIR)
-
-set(_mixed_core_path_styles FALSE)
-if (IS_ABSOLUTE "${KDE_INSTALL_BINDIR}")
- if (NOT IS_ABSOLUTE "${KDE_INSTALL_LIBDIR}" OR NOT IS_ABSOLUTE "${KDE_INSTALL_INCLUDEDIR}")
- set(_mixed_core_path_styles )
- endif()
-else()
- if (IS_ABSOLUTE "${KDE_INSTALL_LIBDIR}" OR IS_ABSOLUTE "${KDE_INSTALL_INCLUDEDIR}")
- set(_mixed_core_path_styles TRUE)
- endif()
-endif()
-if (_mixed_core_path_styles)
- message(WARNING "KDE_INSTALL_BINDIR, KDE_INSTALL_LIBDIR and KDE_INSTALL_INCLUDEDIR should either all be absolute paths or all be relative paths.")
-endif()
-
-
-# For more documentation see above.
-# Later on it will be possible to extend this for installing OSX frameworks
-# The COMPONENT Devel argument has the effect that static libraries belong to the
-# "Devel" install component. If we use this also for all install() commands
-# for header files, it will be possible to install
-# -everything: make install OR cmake -P cmake_install.cmake
-# -only the development files: cmake -DCOMPONENT=Devel -P cmake_install.cmake
-# -everything except the development files: cmake -DCOMPONENT=Unspecified -P cmake_install.cmake
-# This can then also be used for packaging with cpack.
-# FIXME: why is INCLUDES (only) set for ARCHIVE targets?
-set(KDE_INSTALL_TARGETS_DEFAULT_ARGS RUNTIME DESTINATION "${CMAKE_INSTALL_BINDIR}"
- LIBRARY DESTINATION "${CMAKE_INSTALL_LIBDIR}"
- ARCHIVE DESTINATION "${CMAKE_INSTALL_LIBDIR}" COMPONENT Devel
- INCLUDES DESTINATION "${CMAKE_INSTALL_INCLUDEDIR}"
-)
-set(KF5_INSTALL_TARGETS_DEFAULT_ARGS RUNTIME DESTINATION "${CMAKE_INSTALL_BINDIR}"
- LIBRARY DESTINATION "${CMAKE_INSTALL_LIBDIR}"
- ARCHIVE DESTINATION "${CMAKE_INSTALL_LIBDIR}" COMPONENT Devel
- INCLUDES DESTINATION "${CMAKE_INSTALL_INCLUDEDIR_KF5}"
-)
-
-# on the Mac support an extra install directory for application bundles
-if(APPLE)
- set(KDE_INSTALL_TARGETS_DEFAULT_ARGS ${KDE_INSTALL_TARGETS_DEFAULT_ARGS}
- BUNDLE DESTINATION "${BUNDLE_INSTALL_DIR}" )
- set(KF5_INSTALL_TARGETS_DEFAULT_ARGS ${KF5_INSTALL_TARGETS_DEFAULT_ARGS}
- BUNDLE DESTINATION "${BUNDLE_INSTALL_DIR}" )
-endif()
-
-if(NOT KDE_INSTALL_DIRS_NO_DEPRECATED)
- set(INSTALL_TARGETS_DEFAULT_ARGS ${KDE_INSTALL_TARGETS_DEFAULT_ARGS})
-endif()
-
-# new in cmake 2.8.9: this is used for all installed files which do not have a component set
-# so set the default component name to the name of the project, if a project name has been set:
-if(NOT "${PROJECT_NAME}" STREQUAL "Project")
- set(CMAKE_INSTALL_DEFAULT_COMPONENT_NAME "${PROJECT_NAME}")
-endif()
-
-
-###################################################################
-# Prefix set up
-
-configure_file(${CMAKE_CURRENT_LIST_DIR}/prefix.sh.cmake ${CMAKE_CURRENT_BINARY_DIR}/prefix.sh @ONLY)
-find_program(FISH_EXECUTABLE fish)
-if(FISH_EXECUTABLE)
- configure_file(${CMAKE_CURRENT_LIST_DIR}/prefix.sh.fish.cmake ${CMAKE_CURRENT_BINARY_DIR}/prefix.sh.fish @ONLY)
-endif()
-
-option(KDE_INSTALL_PREFIX_SCRIPT "Installs ${CMAKE_INSTALL_PREFIX}/prefix.sh that sets up the necessary environment variables" OFF)
-if(KDE_INSTALL_PREFIX_SCRIPT)
- install(FILES ${CMAKE_CURRENT_BINARY_DIR}/prefix.sh DESTINATION ${CMAKE_INSTALL_PREFIX} PERMISSIONS OWNER_EXECUTE OWNER_WRITE OWNER_READ)
-endif()
-
-if(NOT KDE_INSTALL_USE_QT_SYS_PATHS)
- message("Installing in ${CMAKE_INSTALL_PREFIX}. Run ${CMAKE_CURRENT_BINARY_DIR}/prefix.sh to set the environment for ${CMAKE_PROJECT_NAME}.")
-endif()
+include(${CMAKE_CURRENT_LIST_DIR}/../modules/QtVersionOption.cmake)
+include(${CMAKE_CURRENT_LIST_DIR}/KDEInstallDirs${QT_MAJOR_VERSION}.cmake)
diff --git a/kde-modules/KDEInstallDirs5.cmake b/kde-modules/KDEInstallDirs5.cmake
new file mode 100644
index 00000000..21039420
--- /dev/null
+++ b/kde-modules/KDEInstallDirs5.cmake
@@ -0,0 +1,356 @@
+# SPDX-FileCopyrightText: 2014-2015 Alex Merry <alex.merry@kde.org>
+# SPDX-FileCopyrightText: 2013 Stephen Kelly <steveire@gmail.com>
+# SPDX-FileCopyrightText: 2012 David Faure <faure@kde.org>
+# SPDX-FileCopyrightText: 2007 Matthias Kretz <kretz@kde.org>
+# SPDX-FileCopyrightText: 2006-2007 Laurent Montel <montel@kde.org>
+# SPDX-FileCopyrightText: 2006-2013 Alex Neundorf <neundorf@kde.org>
+#
+# SPDX-License-Identifier: BSD-3-Clause
+
+#[=======================================================================[.rst:
+KDEInstallDirs5
+---------------
+
+Define KDE standard installation directories for Qt5/KF5 based software.
+
+Note that none of the variables defined by this module provide any
+information about the location of already-installed KDE software.
+
+Also sets ``CMAKE_INSTALL_PREFIX`` to the installation prefix of ECM,
+unless that variable has been already explicitly set by something else
+(since 5.61 and with CMake >= 3.7).
+
+Inclusion of this module defines the following variables:
+
+``KDE_INSTALL_<dir>``
+ destination for files of a given type
+``KDE_INSTALL_FULL_<dir>``
+ corresponding absolute path
+
+where ``<dir>`` is one of (default values in parentheses and alternative,
+deprecated variable name in square brackets):
+
+``BUNDLEDIR``
+ application bundles (``/Applications/KDE``) [``BUNDLE_INSTALL_DIR``]
+``EXECROOTDIR``
+ executables and libraries (``<empty>``) [``EXEC_INSTALL_PREFIX``]
+``BINDIR``
+ user executables (``EXECROOTDIR/bin``) [``BIN_INSTALL_DIR``]
+``SBINDIR``
+ system admin executables (``EXECROOTDIR/sbin``) [``SBIN_INSTALL_DIR``]
+``LIBDIR``
+ object code libraries (``EXECROOTDIR/lib``, ``EXECROOTDIR/lib64`` or
+ ``EXECROOTDIR/lib/<multiarch-tuple`` on Debian) [``LIB_INSTALL_DIR``]
+``LIBEXECDIR``
+ executables for internal use by programs and libraries (``BINDIR`` on
+ Windows, ``LIBDIR/libexec`` otherwise) [``LIBEXEC_INSTALL_DIR``]
+``CMAKEPACKAGEDIR``
+ CMake packages, including config files (``LIBDIR/cmake``)
+ [``CMAKECONFIG_INSTALL_PREFIX``]
+``QTPLUGINDIR``
+ Qt plugins (``LIBDIR/plugins`` or qmake-qt5's ``QT_INSTALL_PLUGINS``) [``QT_PLUGIN_INSTALL_DIR``]
+``PLUGINDIR``
+ Plugins (``QTPLUGINDIR``) [``PLUGIN_INSTALL_DIR``]
+``QTQUICKIMPORTSDIR``
+ QtQuick1 imports (``QTPLUGINDIR/imports`` or qmake-qt5's ``QT_INSTALL_IMPORTS``) [``IMPORTS_INSTALL_DIR``]
+``QMLDIR``
+ QtQuick2 imports (``LIBDIR/qml`` or qmake-qt5's ``QT_INSTALL_QML``) [``QML_INSTALL_DIR``]
+``INCLUDEDIR``
+ C and C++ header files (``include``) [``INCLUDE_INSTALL_DIR``]
+``LOCALSTATEDIR``
+ modifiable single-machine data (``var``)
+``SHAREDSTATEDIR``
+ modifiable architecture-independent data (``com``)
+``DATAROOTDIR``
+ read-only architecture-independent data root (``share``)
+ [``SHARE_INSTALL_PREFIX``]
+``DATADIR``
+ read-only architecture-independent data (``DATAROOTDIR``)
+ [``DATA_INSTALL_DIR``]
+``DOCBUNDLEDIR``
+ documentation bundles generated using kdoctools
+ (``DATAROOTDIR/doc/HTML``) [``HTML_INSTALL_DIR``]
+``KCFGDIR``
+ kconfig description files (``DATAROOTDIR/config.kcfg``)
+ [``KCFG_INSTALL_DIR``]
+``KCONFUPDATEDIR``
+ kconf_update scripts (``DATAROOTDIR/kconf_update``)
+ [``KCONF_UPDATE_INSTALL_DIR``]
+``KSERVICES5DIR``
+ services for KDE Frameworks 5 (``DATAROOTDIR/kservices5``)
+ [``SERVICES_INSTALL_DIR``]
+``KSERVICETYPES5DIR``
+ service types for KDE Frameworks 5 (``DATAROOTDIR/kservicetypes5``)
+ [``SERVICETYPES_INSTALL_DIR``]
+``KXMLGUI5DIR``
+ knotify description files (``DATAROOTDIR/kxmlgui5``)
+ [``KXMLGUI_INSTALL_DIR``]
+``KTEMPLATESDIR``
+ Kapptemplate and Kdevelop templates (``kdevappwizard/templates``)
+``KNOTIFY5RCDIR``
+ knotify description files (``DATAROOTDIR/knotifications5``)
+ [``KNOTIFYRC_INSTALL_DIR``]
+``ICONDIR``
+ icons (``DATAROOTDIR/icons``) [``ICON_INSTALL_DIR``]
+``LOCALEDIR``
+ knotify description files (``DATAROOTDIR/locale``)
+ [``LOCALE_INSTALL_DIR``]
+``SOUNDDIR``
+ sound files (``DATAROOTDIR/sounds``) [``SOUND_INSTALL_DIR``]
+``TEMPLATEDIR``
+ templates (``DATAROOTDIR/templates``) [``TEMPLATES_INSTALL_DIR``]
+``WALLPAPERDIR``
+ desktop wallpaper images (``DATAROOTDIR/wallpapers``)
+ [``WALLPAPER_INSTALL_DIR``]
+``APPDIR``
+ application desktop files (``DATAROOTDIR/applications``) Since 1.1.0.
+ [``XDG_APPS_INSTALL_DIR``]
+``DESKTOPDIR``
+ desktop directories (``DATAROOTDIR/desktop-directories``)
+ [``XDG_DIRECTORY_INSTALL_DIR``]
+``MIMEDIR``
+ mime description files (``DATAROOTDIR/mime/packages``)
+ [``XDG_MIME_INSTALL_DIR``]
+``METAINFODIR``
+ AppStream component metadata files (``DATAROOTDIR/metainfo``)
+``QTQCHDIR``
+ documentation bundles in QCH format for Qt-extending libraries (``DATAROOTDIR/doc/qch`` or qmake-qt5's ``QT_INSTALL_DOCS``) Since 5.36.0.
+``QCHDIR``
+ documentation bundles in QCH format (``DATAROOTDIR/doc/qch``) Since 5.36.0.
+``MANDIR``
+ man documentation (``DATAROOTDIR/man``) [``MAN_INSTALL_DIR``]
+``INFODIR``
+ info documentation (``DATAROOTDIR/info``)
+``DBUSDIR``
+ D-Bus (``DATAROOTDIR/dbus-1``)
+``DBUSINTERFACEDIR``
+ D-Bus interfaces (``DBUSDIR/interfaces``)
+ [``DBUS_INTERFACES_INSTALL_DIR``]
+``DBUSSERVICEDIR``
+ D-Bus session services (``DBUSDIR/services``)
+ [``DBUS_SERVICES_INSTALL_DIR``]
+``DBUSSYSTEMSERVICEDIR``
+ D-Bus system services (``DBUSDIR/system-services``)
+ [``DBUS_SYSTEM_SERVICES_INSTALL_DIR``]
+``SYSCONFDIR``
+ read-only single-machine data
+ (``etc``, or ``/etc`` if ``CMAKE_INSTALL_PREFIX`` is ``/usr``)
+ [``SYSCONF_INSTALL_DIR``]
+``CONFDIR``
+ application configuration files (``SYSCONFDIR/xdg``)
+ [``CONFIG_INSTALL_DIR``]
+``AUTOSTARTDIR``
+ autostart files (``CONFDIR/autostart``) [``AUTOSTART_INSTALL_DIR``]
+``LOGGINGCATEGORIESDIR``
+ Qt logging categories files directory (``DATAROOTDIR/qlogging-categories5``) Since 5.59.0
+``JARDIR``
+ Java AAR/JAR files for Android. Since 5.62.0
+``SYSTEMDUNITDIR``
+ Systemd Units (``lib/systemd``)
+ [``SYSTEMD_UNIT_INSTALL_DIR``]. Since 5.65
+``SYSTEMDUSERUNITDIR``
+ Systemd User Units (``lib/systemd/user``)
+ [``SYSTEMD_USER_UNIT_INSTALL_DIR``]. Since 5.65
+
+If ``KDE_INSTALL_USE_QT_SYS_PATHS`` is set to TRUE before including this
+module, the default values for some variables are instead queried from
+Qt5's qmake (where mentioned in the parentheses above).
+If not set, it will default to TRUE if Qt5's qmake is found and
+it's ``QT_INSTALL_PREFIX`` is the same as ``CMAKE_INSTALL_PREFIX``,
+otherwise default to FALSE.
+This variable should NOT be set from within CMakeLists.txt files, instead
+is intended to be set manually when configuring a project which uses
+KDEInstallDirs (e.g. by packagers).
+
+If ``KDE_INSTALL_DIRS_NO_DEPRECATED`` is set to TRUE before including this
+module, the deprecated variables (listed in the square brackets above) are
+not defined.
+
+In addition, for each ``KDE_INSTALL_*`` variable, an equivalent
+``CMAKE_INSTALL_*`` variable is defined. If
+``KDE_INSTALL_DIRS_NO_DEPRECATED`` is set to TRUE, only those variables
+defined by the ``GNUInstallDirs`` module (shipped with CMake) are defined.
+If ``KDE_INSTALL_DIRS_NO_CMAKE_VARIABLES`` is set to TRUE, no variables with
+a ``CMAKE_`` prefix will be defined by this module (other than
+CMAKE_INSTALL_DEFAULT_COMPONENT_NAME - see below).
+
+The ``KDE_INSTALL_<dir>`` variables (or their ``CMAKE_INSTALL_<dir>`` or
+deprecated counterparts) may be passed to the DESTINATION options of
+``install()`` commands for the corresponding file type. They are set in the
+CMake cache, and so the defaults above can be overridden by users.
+
+Note that the ``KDE_INSTALL_<dir>``, ``CMAKE_INSTALL_<dir>`` or deprecated
+form of the variable can be changed using CMake command line variable
+definitions; in either case, all forms of the variable will be affected. The
+effect of passing multiple forms of the same variable on the command line
+(such as ``KDE_INSTALL_BINDIR`` and ``CMAKE_INSTALL_BINDIR`` is undefined.
+
+The variable ``KDE_INSTALL_TARGETS_DEFAULT_ARGS`` is also defined (along with
+the deprecated form ``INSTALL_TARGETS_DEFAULT_ARGS``). This should be used
+when libraries or user-executable applications are installed, in the
+following manner:
+
+.. code-block:: cmake
+
+ install(TARGETS mylib myapp ${KDE_INSTALL_TARGETS_DEFAULT_ARGS})
+
+It MUST NOT be used for installing plugins, system admin executables or
+executables only intended for use internally by other code. Those should use
+``KDE_INSTALL_PLUGINDIR``, ``KDE_INSTALL_SBINDIR`` or
+``KDE_INSTALL_LIBEXECDIR`` respectively.
+
+Additionally, ``CMAKE_INSTALL_DEFAULT_COMPONENT_NAME`` will be set to
+``${PROJECT_NAME}`` to provide a sensible default for this CMake option.
+
+Note that mixing absolute and relative paths, particularly for ``BINDIR``,
+``LIBDIR`` and ``INCLUDEDIR``, can cause issues with exported targets. Given
+that the default values for these are relative paths, relative paths should
+be used on the command line when possible (eg: use
+``-DKDE_INSTALL_LIBDIR=lib64`` instead of
+``-DKDE_INSTALL_LIBDIR=/usr/lib/lib64`` to override the library directory).
+
+Since 5.82.0, prior to that available as KDEInstallDirs.
+
+NB: The variables starting ``KDE_INSTALL_`` are available since 1.6.0,
+unless otherwise noted with the variable.
+
+The ``KDE_INSTALL_PREFIX_SCRIPT`` option will install a ${CMAKE_INSTALL_PREFIX}/prefix.sh
+file that allows to easily incorporate the necessary environment variables
+for the prefix into a process.
+
+#]=======================================================================]
+
+include(${CMAKE_CURRENT_LIST_DIR}/KDEInstallDirsCommon.cmake)
+
+if(WIN32)
+ _define_non_cache(LIBEXECDIR_KF5 "${CMAKE_INSTALL_LIBEXECDIR}")
+else()
+ _define_non_cache(LIBEXECDIR_KF5 "${CMAKE_INSTALL_LIBEXECDIR}/kf5")
+endif()
+if(NOT KDE_INSTALL_DIRS_NO_DEPRECATED)
+ set(KF5_LIBEXEC_INSTALL_DIR "${CMAKE_INSTALL_LIBEXECDIR_KF5}")
+endif()
+
+include("${ECM_MODULE_DIR}/ECMQueryQmake.cmake")
+
+set(_default_KDE_INSTALL_USE_QT_SYS_PATHS OFF)
+if(NOT DEFINED KDE_INSTALL_USE_QT_SYS_PATHS)
+ query_qmake(qt_install_prefix_dir QT_INSTALL_PREFIX TRY)
+ if(qt_install_prefix_dir STREQUAL "${CMAKE_INSTALL_PREFIX}")
+ message(STATUS "Installing in the same prefix as Qt, adopting their path scheme.")
+ set(_default_KDE_INSTALL_USE_QT_SYS_PATHS ON)
+ endif()
+endif()
+
+option (KDE_INSTALL_USE_QT_SYS_PATHS "Install mkspecs files, QCH files for Qt-based libs, Plugins and Imports to the Qt 5 install dir" "${_default_KDE_INSTALL_USE_QT_SYS_PATHS}")
+if(KDE_INSTALL_USE_QT_SYS_PATHS)
+ # Qt-specific vars
+ query_qmake(qt_install_prefix_dir QT_INSTALL_PREFIX TRY)
+ query_qmake(qt_plugins_dir QT_INSTALL_PLUGINS)
+
+ if(qt_install_prefix_dir STREQUAL "${CMAKE_INSTALL_PREFIX}")
+ file(RELATIVE_PATH qt_plugins_dir ${qt_install_prefix_dir} ${qt_plugins_dir})
+ endif()
+ _define_absolute(QTPLUGINDIR ${qt_plugins_dir}
+ "Qt plugins"
+ QT_PLUGIN_INSTALL_DIR)
+
+ query_qmake(qt_imports_dir QT_INSTALL_IMPORTS)
+
+ if(qt_install_prefix_dir STREQUAL "${CMAKE_INSTALL_PREFIX}")
+ file(RELATIVE_PATH qt_imports_dir ${qt_install_prefix_dir} ${qt_imports_dir})
+ endif()
+ _define_absolute(QTQUICKIMPORTSDIR ${qt_imports_dir}
+ "QtQuick1 imports"
+ IMPORTS_INSTALL_DIR)
+
+ query_qmake(qt_qml_dir QT_INSTALL_QML)
+
+ if(qt_install_prefix_dir STREQUAL "${CMAKE_INSTALL_PREFIX}")
+ file(RELATIVE_PATH qt_qml_dir ${qt_install_prefix_dir} ${qt_qml_dir})
+ endif()
+ _define_absolute(QMLDIR ${qt_qml_dir}
+ "QtQuick2 imports"
+ QML_INSTALL_DIR)
+else()
+ set(_pluginsDirParent LIBDIR)
+ if (ANDROID)
+ set(_pluginsDirParent)
+ #androiddeployqt wants plugins right in the prefix
+ endif()
+ _define_relative(QTPLUGINDIR "${_pluginsDirParent}" "plugins"
+ "Qt plugins"
+ QT_PLUGIN_INSTALL_DIR)
+
+ _define_relative(QTQUICKIMPORTSDIR QTPLUGINDIR "imports"
+ "QtQuick1 imports"
+ IMPORTS_INSTALL_DIR)
+
+ _define_relative(QMLDIR LIBDIR "qml"
+ "QtQuick2 imports"
+ QML_INSTALL_DIR)
+endif()
+
+_define_non_cache(INCLUDEDIR_KF5 "${CMAKE_INSTALL_INCLUDEDIR}/KF5")
+if(NOT KDE_INSTALL_DIRS_NO_DEPRECATED)
+ set(KF5_INCLUDE_INSTALL_DIR "${CMAKE_INSTALL_INCLUDEDIR_KF5}")
+endif()
+
+
+_define_non_cache(DATADIR_KF5 "${CMAKE_INSTALL_DATADIR}/kf5")
+if(NOT KDE_INSTALL_DIRS_NO_DEPRECATED)
+ set(KF5_DATA_INSTALL_DIR "${CMAKE_INSTALL_DATADIR_KF5}")
+endif()
+
+# Qt-specific data vars
+if(KDE_INSTALL_USE_QT_SYS_PATHS)
+ query_qmake(qt_docs_dir QT_INSTALL_DOCS)
+
+ _define_absolute(QTQCHDIR ${qt_docs_dir}
+ "documentation bundles in QCH format for Qt-extending libraries")
+else()
+ _define_relative(QTQCHDIR DATAROOTDIR "doc/qch"
+ "documentation bundles in QCH format for Qt-extending libraries")
+endif()
+
+
+# KDE Framework-specific things
+_define_relative(KSERVICES5DIR DATAROOTDIR "kservices5"
+ "services for KDE Frameworks 5"
+ SERVICES_INSTALL_DIR)
+_define_relative(KSERVICETYPES5DIR DATAROOTDIR "kservicetypes5"
+ "service types for KDE Frameworks 5"
+ SERVICETYPES_INSTALL_DIR)
+_define_relative(KNOTIFY5RCDIR DATAROOTDIR "knotifications5"
+ "knotify description files"
+ KNOTIFYRC_INSTALL_DIR)
+_define_relative(KXMLGUI5DIR DATAROOTDIR "kxmlgui5"
+ "kxmlgui .rc files"
+ KXMLGUI_INSTALL_DIR)
+_define_relative(LOGGINGCATEGORIESDIR DATAROOTDIR "qlogging-categories5"
+ "Qt Logging categories files")
+
+
+# For more documentation see above.
+# Later on it will be possible to extend this for installing OSX frameworks
+# The COMPONENT Devel argument has the effect that static libraries belong to the
+# "Devel" install component. If we use this also for all install() commands
+# for header files, it will be possible to install
+# -everything: make install OR cmake -P cmake_install.cmake
+# -only the development files: cmake -DCOMPONENT=Devel -P cmake_install.cmake
+# -everything except the development files: cmake -DCOMPONENT=Unspecified -P cmake_install.cmake
+# This can then also be used for packaging with cpack.
+# FIXME: why is INCLUDES (only) set for ARCHIVE targets?
+set(KF5_INSTALL_TARGETS_DEFAULT_ARGS RUNTIME DESTINATION "${CMAKE_INSTALL_BINDIR}"
+ LIBRARY DESTINATION "${CMAKE_INSTALL_LIBDIR}"
+ ARCHIVE DESTINATION "${CMAKE_INSTALL_LIBDIR}" COMPONENT Devel
+ INCLUDES DESTINATION "${CMAKE_INSTALL_INCLUDEDIR_KF5}"
+)
+
+# on the Mac support an extra install directory for application bundles
+if(APPLE)
+ set(KF5_INSTALL_TARGETS_DEFAULT_ARGS ${KF5_INSTALL_TARGETS_DEFAULT_ARGS}
+ BUNDLE DESTINATION "${BUNDLE_INSTALL_DIR}" )
+endif()
+
+include(${CMAKE_CURRENT_LIST_DIR}/KDESetupPrefixScript.cmake)
diff --git a/kde-modules/KDEInstallDirs6.cmake b/kde-modules/KDEInstallDirs6.cmake
new file mode 100644
index 00000000..e0e03c10
--- /dev/null
+++ b/kde-modules/KDEInstallDirs6.cmake
@@ -0,0 +1,332 @@
+# SPDX-FileCopyrightText: 2014-2015 Alex Merry <alex.merry@kde.org>
+# SPDX-FileCopyrightText: 2013 Stephen Kelly <steveire@gmail.com>
+# SPDX-FileCopyrightText: 2012 David Faure <faure@kde.org>
+# SPDX-FileCopyrightText: 2007 Matthias Kretz <kretz@kde.org>
+# SPDX-FileCopyrightText: 2006-2007 Laurent Montel <montel@kde.org>
+# SPDX-FileCopyrightText: 2006-2013 Alex Neundorf <neundorf@kde.org>
+# SPDX-FileCopyrightText: 2021 Volker Krause <vkrause@kde.org>
+#
+# SPDX-License-Identifier: BSD-3-Clause
+
+#[=======================================================================[.rst:
+KDEInstallDirs6
+---------------
+
+Define KDE standard installation directories for Qt6/KF6 based software.
+
+Note that none of the variables defined by this module provide any
+information about the location of already-installed KDE software.
+
+Also sets ``CMAKE_INSTALL_PREFIX`` to the installation prefix of ECM,
+unless that variable has been already explicitly set by something else.
+
+Inclusion of this module defines the following variables:
+
+``KDE_INSTALL_<dir>``
+ destination for files of a given type
+``KDE_INSTALL_FULL_<dir>``
+ corresponding absolute path
+
+where ``<dir>`` is one of (default values in parentheses and alternative,
+deprecated variable name in square brackets):
+
+``BUNDLEDIR``
+ application bundles (``/Applications/KDE``) [``BUNDLE_INSTALL_DIR``]
+``EXECROOTDIR``
+ executables and libraries (``<empty>``) [``EXEC_INSTALL_PREFIX``]
+``BINDIR``
+ user executables (``EXECROOTDIR/bin``) [``BIN_INSTALL_DIR``]
+``SBINDIR``
+ system admin executables (``EXECROOTDIR/sbin``) [``SBIN_INSTALL_DIR``]
+``LIBDIR``
+ object code libraries (``EXECROOTDIR/lib``, ``EXECROOTDIR/lib64`` or
+ ``EXECROOTDIR/lib/<multiarch-tuple`` on Debian) [``LIB_INSTALL_DIR``]
+``LIBEXECDIR``
+ executables for internal use by programs and libraries (``BINDIR`` on
+ Windows, ``LIBDIR/libexec`` otherwise) [``LIBEXEC_INSTALL_DIR``]
+``CMAKEPACKAGEDIR``
+ CMake packages, including config files (``LIBDIR/cmake``)
+ [``CMAKECONFIG_INSTALL_PREFIX``]
+``QTPLUGINDIR``
+ Qt plugins (``LIBDIR/plugins`` or qmake-qt5's ``QT_INSTALL_PLUGINS``) [``QT_PLUGIN_INSTALL_DIR``]
+``PLUGINDIR``
+ Plugins (``QTPLUGINDIR``) [``PLUGIN_INSTALL_DIR``]
+``QMLDIR``
+ QtQuick2 imports (``LIBDIR/qml`` or qmake-qt5's ``QT_INSTALL_QML``) [``QML_INSTALL_DIR``]
+``INCLUDEDIR``
+ C and C++ header files (``include``) [``INCLUDE_INSTALL_DIR``]
+``LOCALSTATEDIR``
+ modifiable single-machine data (``var``)
+``SHAREDSTATEDIR``
+ modifiable architecture-independent data (``com``)
+``DATAROOTDIR``
+ read-only architecture-independent data root (``share``)
+ [``SHARE_INSTALL_PREFIX``]
+``DATADIR``
+ read-only architecture-independent data (``DATAROOTDIR``)
+ [``DATA_INSTALL_DIR``]
+``DOCBUNDLEDIR``
+ documentation bundles generated using kdoctools
+ (``DATAROOTDIR/doc/HTML``) [``HTML_INSTALL_DIR``]
+``KCFGDIR``
+ kconfig description files (``DATAROOTDIR/config.kcfg``)
+ [``KCFG_INSTALL_DIR``]
+``KCONFUPDATEDIR``
+ kconf_update scripts (``DATAROOTDIR/kconf_update``)
+ [``KCONF_UPDATE_INSTALL_DIR``]
+``KSERVICES6DIR``
+ services for KDE Frameworks 6 (``DATAROOTDIR/kservices6``)
+ [``SERVICES_INSTALL_DIR``]
+``KSERVICETYPES6DIR``
+ service types for KDE Frameworks 6 (``DATAROOTDIR/kservicetypes6``)
+ [``SERVICETYPES_INSTALL_DIR``]
+``KXMLGUI6DIR``
+ knotify description files (``DATAROOTDIR/kxmlgui6``)
+ [``KXMLGUI_INSTALL_DIR``]
+``KTEMPLATESDIR``
+ Kapptemplate and Kdevelop templates (``kdevappwizard/templates``)
+``KNOTIFY6RCDIR``
+ knotify description files (``DATAROOTDIR/knotifications6``)
+ [``KNOTIFYRC_INSTALL_DIR``]
+``ICONDIR``
+ icons (``DATAROOTDIR/icons``) [``ICON_INSTALL_DIR``]
+``LOCALEDIR``
+ knotify description files (``DATAROOTDIR/locale``)
+ [``LOCALE_INSTALL_DIR``]
+``SOUNDDIR``
+ sound files (``DATAROOTDIR/sounds``) [``SOUND_INSTALL_DIR``]
+``TEMPLATEDIR``
+ templates (``DATAROOTDIR/templates``) [``TEMPLATES_INSTALL_DIR``]
+``WALLPAPERDIR``
+ desktop wallpaper images (``DATAROOTDIR/wallpapers``)
+ [``WALLPAPER_INSTALL_DIR``]
+``APPDIR``
+ application desktop files (``DATAROOTDIR/applications``) Since 1.1.0.
+ [``XDG_APPS_INSTALL_DIR``]
+``DESKTOPDIR``
+ desktop directories (``DATAROOTDIR/desktop-directories``)
+ [``XDG_DIRECTORY_INSTALL_DIR``]
+``MIMEDIR``
+ mime description files (``DATAROOTDIR/mime/packages``)
+ [``XDG_MIME_INSTALL_DIR``]
+``METAINFODIR``
+ AppStream component metadata files (``DATAROOTDIR/metainfo``)
+``QTQCHDIR``
+ documentation bundles in QCH format for Qt-extending libraries (``DATAROOTDIR/doc/qch`` or qmake-qt5's ``QT_INSTALL_DOCS``)
+``QCHDIR``
+ documentation bundles in QCH format (``DATAROOTDIR/doc/qch``)
+``MANDIR``
+ man documentation (``DATAROOTDIR/man``) [``MAN_INSTALL_DIR``]
+``INFODIR``
+ info documentation (``DATAROOTDIR/info``)
+``DBUSDIR``
+ D-Bus (``DATAROOTDIR/dbus-1``)
+``DBUSINTERFACEDIR``
+ D-Bus interfaces (``DBUSDIR/interfaces``)
+ [``DBUS_INTERFACES_INSTALL_DIR``]
+``DBUSSERVICEDIR``
+ D-Bus session services (``DBUSDIR/services``)
+ [``DBUS_SERVICES_INSTALL_DIR``]
+``DBUSSYSTEMSERVICEDIR``
+ D-Bus system services (``DBUSDIR/system-services``)
+ [``DBUS_SYSTEM_SERVICES_INSTALL_DIR``]
+``SYSCONFDIR``
+ read-only single-machine data
+ (``etc``, or ``/etc`` if ``CMAKE_INSTALL_PREFIX`` is ``/usr``)
+ [``SYSCONF_INSTALL_DIR``]
+``CONFDIR``
+ application configuration files (``SYSCONFDIR/xdg``)
+ [``CONFIG_INSTALL_DIR``]
+``AUTOSTARTDIR``
+ autostart files (``CONFDIR/autostart``) [``AUTOSTART_INSTALL_DIR``]
+``LOGGINGCATEGORIESDIR``
+ Qt logging categories files directory (``DATAROOTDIR/qlogging-categories6``)
+``JARDIR``
+ Java AAR/JAR files for Android.
+``SYSTEMDUNITDIR``
+ Systemd Units (``lib/systemd``)
+ [``SYSTEMD_UNIT_INSTALL_DIR``].
+``SYSTEMDUSERUNITDIR``
+ Systemd User Units (``lib/systemd/user``)
+ [``SYSTEMD_USER_UNIT_INSTALL_DIR``].
+
+TODO TODO TODO
+If ``KDE_INSTALL_USE_QT_SYS_PATHS`` is set to TRUE before including this
+module, the default values for some variables are instead queried from
+Qt6's qmake (where mentioned in the parentheses above).
+If not set, it will default to TRUE if Qt6's qmake is found and
+it's ``QT_INSTALL_PREFIX`` is the same as ``CMAKE_INSTALL_PREFIX``,
+otherwise default to FALSE.
+This variable should NOT be set from within CMakeLists.txt files, instead
+is intended to be set manually when configuring a project which uses
+KDEInstallDirs (e.g. by packagers).
+
+If ``KDE_INSTALL_DIRS_NO_DEPRECATED`` is set to TRUE before including this
+module, the deprecated variables (listed in the square brackets above) are
+not defined.
+
+In addition, for each ``KDE_INSTALL_*`` variable, an equivalent
+``CMAKE_INSTALL_*`` variable is defined. If
+``KDE_INSTALL_DIRS_NO_DEPRECATED`` is set to TRUE, only those variables
+defined by the ``GNUInstallDirs`` module (shipped with CMake) are defined.
+If ``KDE_INSTALL_DIRS_NO_CMAKE_VARIABLES`` is set to TRUE, no variables with
+a ``CMAKE_`` prefix will be defined by this module (other than
+CMAKE_INSTALL_DEFAULT_COMPONENT_NAME - see below).
+
+The ``KDE_INSTALL_<dir>`` variables (or their ``CMAKE_INSTALL_<dir>`` or
+deprecated counterparts) may be passed to the DESTINATION options of
+``install()`` commands for the corresponding file type. They are set in the
+CMake cache, and so the defaults above can be overridden by users.
+
+Note that the ``KDE_INSTALL_<dir>``, ``CMAKE_INSTALL_<dir>`` or deprecated
+form of the variable can be changed using CMake command line variable
+definitions; in either case, all forms of the variable will be affected. The
+effect of passing multiple forms of the same variable on the command line
+(such as ``KDE_INSTALL_BINDIR`` and ``CMAKE_INSTALL_BINDIR`` is undefined.
+
+The variable ``KDE_INSTALL_TARGETS_DEFAULT_ARGS`` is also defined (along with
+the deprecated form ``INSTALL_TARGETS_DEFAULT_ARGS``). This should be used
+when libraries or user-executable applications are installed, in the
+following manner:
+
+.. code-block:: cmake
+
+ install(TARGETS mylib myapp ${KDE_INSTALL_TARGETS_DEFAULT_ARGS})
+
+It MUST NOT be used for installing plugins, system admin executables or
+executables only intended for use internally by other code. Those should use
+``KDE_INSTALL_PLUGINDIR``, ``KDE_INSTALL_SBINDIR`` or
+``KDE_INSTALL_LIBEXECDIR`` respectively.
+
+Additionally, ``CMAKE_INSTALL_DEFAULT_COMPONENT_NAME`` will be set to
+``${PROJECT_NAME}`` to provide a sensible default for this CMake option.
+
+Note that mixing absolute and relative paths, particularly for ``BINDIR``,
+``LIBDIR`` and ``INCLUDEDIR``, can cause issues with exported targets. Given
+that the default values for these are relative paths, relative paths should
+be used on the command line when possible (eg: use
+``-DKDE_INSTALL_LIBDIR=lib64`` instead of
+``-DKDE_INSTALL_LIBDIR=/usr/lib/lib64`` to override the library directory).
+
+Since 5.82.0.
+
+The ``KDE_INSTALL_PREFIX_SCRIPT`` option will install a ${CMAKE_INSTALL_PREFIX}/prefix.sh
+file that allows to easily incorporate the necessary environment variables
+for the prefix into a process.
+#]=======================================================================]
+
+
+include(${CMAKE_CURRENT_LIST_DIR}/KDEInstallDirsCommon.cmake)
+
+if(WIN32)
+ _define_non_cache(LIBEXECDIR_KF6 "${CMAKE_INSTALL_LIBEXECDIR}")
+else()
+ _define_non_cache(LIBEXECDIR_KF6 "${CMAKE_INSTALL_LIBEXECDIR}/kf6")
+endif()
+
+# TODO TODO TODO
+#include("${ECM_MODULE_DIR}/ECMQueryQmake.cmake")
+
+set(_default_KDE_INSTALL_USE_QT_SYS_PATHS OFF)
+if(NOT DEFINED KDE_INSTALL_USE_QT_SYS_PATHS)
+ query_qmake(qt_install_prefix_dir QT_INSTALL_PREFIX TRY)
+ if(qt_install_prefix_dir STREQUAL "${CMAKE_INSTALL_PREFIX}")
+ message(STATUS "Installing in the same prefix as Qt, adopting their path scheme.")
+ set(_default_KDE_INSTALL_USE_QT_SYS_PATHS ON)
+ endif()
+endif()
+
+option (KDE_INSTALL_USE_QT_SYS_PATHS "Install mkspecs files, QCH files for Qt-based libs, Plugins and Imports to the Qt 5 install dir" "${_default_KDE_INSTALL_USE_QT_SYS_PATHS}")
+# TODO TODO TODO
+#if(KDE_INSTALL_USE_QT_SYS_PATHS)
+# # Qt-specific vars
+# query_qmake(qt_install_prefix_dir QT_INSTALL_PREFIX TRY)
+# query_qmake(qt_plugins_dir QT_INSTALL_PLUGINS)
+#
+# if(qt_install_prefix_dir STREQUAL "${CMAKE_INSTALL_PREFIX}")
+# file(RELATIVE_PATH qt_plugins_dir ${qt_install_prefix_dir} ${qt_plugins_dir})
+# endif()
+# _define_absolute(QTPLUGINDIR ${qt_plugins_dir}
+# "Qt plugins"
+# QT_PLUGIN_INSTALL_DIR)
+#
+# query_qmake(qt_qml_dir QT_INSTALL_QML)
+#
+# if(qt_install_prefix_dir STREQUAL "${CMAKE_INSTALL_PREFIX}")
+# file(RELATIVE_PATH qt_qml_dir ${qt_install_prefix_dir} ${qt_qml_dir})
+# endif()
+# _define_absolute(QMLDIR ${qt_qml_dir}
+# "QtQuick2 imports"
+# QML_INSTALL_DIR)
+#else()
+ set(_pluginsDirParent LIBDIR)
+ if (ANDROID)
+ set(_pluginsDirParent)
+ #androiddeployqt wants plugins right in the prefix
+ endif()
+ _define_relative(QTPLUGINDIR "${_pluginsDirParent}" "plugins"
+ "Qt plugins"
+ QT_PLUGIN_INSTALL_DIR)
+
+ _define_relative(QMLDIR LIBDIR "qml"
+ "QtQuick2 imports"
+ QML_INSTALL_DIR)
+#endif()
+
+_define_non_cache(INCLUDEDIR_KF6 "${CMAKE_INSTALL_INCLUDEDIR}/KF6")
+
+_define_non_cache(DATADIR_KF5 "${CMAKE_INSTALL_DATADIR}/kf6")
+
+# TODO TODO TODO
+# Qt-specific data vars
+#if(KDE_INSTALL_USE_QT_SYS_PATHS)
+# query_qmake(qt_docs_dir QT_INSTALL_DOCS)
+#
+# _define_absolute(QTQCHDIR ${qt_docs_dir}
+# "documentation bundles in QCH format for Qt-extending libraries")
+#else()
+ _define_relative(QTQCHDIR DATAROOTDIR "doc/qch"
+ "documentation bundles in QCH format for Qt-extending libraries")
+#endif()
+
+
+# KDE Framework-specific things
+_define_relative(KSERVICES6DIR DATAROOTDIR "kservices6"
+ "services for KDE Frameworks 6"
+ SERVICES_INSTALL_DIR)
+_define_relative(KSERVICETYPES6DIR DATAROOTDIR "kservicetypes6"
+ "service types for KDE Frameworks 6"
+ SERVICETYPES_INSTALL_DIR)
+_define_relative(KNOTIFY6RCDIR DATAROOTDIR "knotifications6"
+ "knotify description files"
+ KNOTIFYRC_INSTALL_DIR)
+_define_relative(KXMLGUI6DIR DATAROOTDIR "kxmlgui6"
+ "kxmlgui .rc files"
+ KXMLGUI_INSTALL_DIR)
+_define_relative(LOGGINGCATEGORIESDIR DATAROOTDIR "qlogging-categories6"
+ "Qt Logging categories files")
+
+
+# For more documentation see above.
+# Later on it will be possible to extend this for installing OSX frameworks
+# The COMPONENT Devel argument has the effect that static libraries belong to the
+# "Devel" install component. If we use this also for all install() commands
+# for header files, it will be possible to install
+# -everything: make install OR cmake -P cmake_install.cmake
+# -only the development files: cmake -DCOMPONENT=Devel -P cmake_install.cmake
+# -everything except the development files: cmake -DCOMPONENT=Unspecified -P cmake_install.cmake
+# This can then also be used for packaging with cpack.
+# FIXME: why is INCLUDES (only) set for ARCHIVE targets?
+set(KF6_INSTALL_TARGETS_DEFAULT_ARGS RUNTIME DESTINATION "${CMAKE_INSTALL_BINDIR}"
+ LIBRARY DESTINATION "${CMAKE_INSTALL_LIBDIR}"
+ ARCHIVE DESTINATION "${CMAKE_INSTALL_LIBDIR}" COMPONENT Devel
+ INCLUDES DESTINATION "${CMAKE_INSTALL_INCLUDEDIR_KF6}"
+)
+
+# on the Mac support an extra install directory for application bundles
+if(APPLE)
+ set(KF6_INSTALL_TARGETS_DEFAULT_ARGS ${KF6_INSTALL_TARGETS_DEFAULT_ARGS}
+ BUNDLE DESTINATION "${BUNDLE_INSTALL_DIR}" )
+endif()
+
+include(${CMAKE_CURRENT_LIST_DIR}/KDESetupPrefixScript.cmake)
diff --git a/kde-modules/KDEInstallDirsCommon.cmake b/kde-modules/KDEInstallDirsCommon.cmake
new file mode 100644
index 00000000..a492a14d
--- /dev/null
+++ b/kde-modules/KDEInstallDirsCommon.cmake
@@ -0,0 +1,392 @@
+# SPDX-FileCopyrightText: 2014-2015 Alex Merry <alex.merry@kde.org>
+# SPDX-FileCopyrightText: 2013 Stephen Kelly <steveire@gmail.com>
+# SPDX-FileCopyrightText: 2012 David Faure <faure@kde.org>
+# SPDX-FileCopyrightText: 2007 Matthias Kretz <kretz@kde.org>
+# SPDX-FileCopyrightText: 2006-2007 Laurent Montel <montel@kde.org>
+# SPDX-FileCopyrightText: 2006-2013 Alex Neundorf <neundorf@kde.org>
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+# Common implementation details of KDEInstallDirsX.cmake, not public API.
+#
+
+# Figure out what the default install directory for libraries should be.
+# This is based on the logic in GNUInstallDirs, but simplified (the
+# GNUInstallDirs code deals with re-configuring, but that is dealt with
+# by the _define_* macros in this module).
+set(_LIBDIR_DEFAULT "lib")
+# Override this default 'lib' with 'lib64' if:
+# - we are on a Linux, kFreeBSD or Hurd system but NOT cross-compiling
+# - we are NOT on debian
+# - we are NOT on flatpak
+# - we are on a 64 bits system
+# reason is: amd64 ABI: http://www.x86-64.org/documentation/abi.pdf
+# For Debian with multiarch, use 'lib/${CMAKE_LIBRARY_ARCHITECTURE}' if
+# CMAKE_LIBRARY_ARCHITECTURE is set (which contains e.g. "i386-linux-gnu"
+# See https://wiki.debian.org/Multiarch
+if((CMAKE_SYSTEM_NAME MATCHES "Linux|kFreeBSD" OR CMAKE_SYSTEM_NAME STREQUAL "GNU")
+ AND NOT CMAKE_CROSSCOMPILING
+ AND NOT EXISTS "/etc/arch-release"
+ AND NOT DEFINED ENV{FLATPAK_ID})
+ if (EXISTS "/etc/debian_version") # is this a debian system ?
+ if(CMAKE_LIBRARY_ARCHITECTURE)
+ set(_LIBDIR_DEFAULT "lib/${CMAKE_LIBRARY_ARCHITECTURE}")
+ endif()
+ else() # not debian, rely on CMAKE_SIZEOF_VOID_P:
+ if(NOT DEFINED CMAKE_SIZEOF_VOID_P)
+ message(AUTHOR_WARNING
+ "Unable to determine default LIB_INSTALL_LIBDIR directory because no target architecture is known. "
+ "Please enable at least one language before including KDEInstallDirs.")
+ else()
+ if("${CMAKE_SIZEOF_VOID_P}" EQUAL "8")
+ set(_LIBDIR_DEFAULT "lib64")
+ endif()
+ endif()
+ endif()
+endif()
+
+set(_gnu_install_dirs_vars
+ BINDIR
+ SBINDIR
+ LIBEXECDIR
+ SYSCONFDIR
+ SHAREDSTATEDIR
+ LOCALSTATEDIR
+ LIBDIR
+ INCLUDEDIR
+ OLDINCLUDEDIR
+ DATAROOTDIR
+ DATADIR
+ INFODIR
+ LOCALEDIR
+ MANDIR
+ DOCDIR)
+
+# Macro for variables that are relative to another variable. We store an empty
+# value in the cache (for documentation/GUI cache editor purposes), and store
+# the default value in a local variable. If the cache variable is ever set to
+# something non-empty, the local variable will no longer be set. However, if
+# the cache variable remains (or is set to be) empty, the value will be
+# relative to that of the parent variable.
+#
+# varname: the variable name suffix (eg: BINDIR for KDE_INSTALL_BINDIR)
+# parent: the variable suffix of the variable this is relative to
+# (eg: DATAROOTDIR for KDE_INSTALL_DATAROOTDIR)
+# subdir: the path of the default value of KDE_INSTALL_${varname}
+# relative to KDE_INSTALL_${parent}: no leading /
+# docstring: documentation about the variable (not including the default value)
+# oldstylename (optional): the old-style name of the variable
+macro(_define_relative varname parent subdir docstring)
+ set(_oldstylename)
+ if(NOT KDE_INSTALL_DIRS_NO_DEPRECATED AND ${ARGC} GREATER 4)
+ set(_oldstylename "${ARGV4}")
+ endif()
+ set(_cmakename)
+ if(NOT KDE_INSTALL_DIRS_NO_CMAKE_VARIABLES)
+ list(FIND _gnu_install_dirs_vars "${varname}" _list_offset)
+ set(_cmakename_is_deprecated FALSE)
+ if(NOT KDE_INSTALL_DIRS_NO_DEPRECATED OR NOT _list_offset EQUAL -1)
+ set(_cmakename CMAKE_INSTALL_${varname})
+ if(_list_offset EQUAL -1)
+ set(_cmakename_is_deprecated TRUE)
+ endif()
+ endif()
+ endif()
+
+ # Surprisingly complex logic to deal with joining paths.
+ # Note that we cannot use arg vars directly in if() because macro args are
+ # not proper variables.
+ set(_parent "${parent}")
+ set(_subdir "${subdir}")
+ if(_parent AND _subdir)
+ set(_docpath "${_parent}/${_subdir}")
+ if(KDE_INSTALL_${_parent})
+ set(_realpath "${KDE_INSTALL_${_parent}}/${_subdir}")
+ else()
+ set(_realpath "${_subdir}")
+ endif()
+ elseif(_parent)
+ set(_docpath "${_parent}")
+ set(_realpath "${KDE_INSTALL_${_parent}}")
+ else()
+ set(_docpath "${_subdir}")
+ set(_realpath "${_subdir}")
+ endif()
+
+ if(KDE_INSTALL_${varname})
+ # make sure the cache documentation is set correctly
+ get_property(_iscached CACHE KDE_INSTALL_${varname} PROPERTY VALUE SET)
+ if (_iscached)
+ # make sure the docs are still set if it was passed on the command line
+ set_property(CACHE KDE_INSTALL_${varname}
+ PROPERTY HELPSTRING "${docstring} (${_docpath})")
+ # make sure the type is correct if it was passed on the command line
+ set_property(CACHE KDE_INSTALL_${varname}
+ PROPERTY TYPE PATH)
+ endif()
+ elseif(${_oldstylename})
+ message(DEPRECATION "${_oldstylename} is deprecated, use KDE_INSTALL_${varname} instead.")
+ # The old name was given (probably on the command line): move
+ # it to the new name
+ set(KDE_INSTALL_${varname} "${${_oldstylename}}"
+ CACHE PATH
+ "${docstring} (${_docpath})"
+ FORCE)
+ elseif(${_cmakename})
+ if(_cmakename_is_deprecated)
+ message(DEPRECATION "${_cmakename} is deprecated, use KDE_INSTALL_${varname} instead.")
+ endif()
+ # The CMAKE_ name was given (probably on the command line): move
+ # it to the new name
+ set(KDE_INSTALL_${varname} "${${_cmakename}}"
+ CACHE PATH
+ "${docstring} (${_docpath})"
+ FORCE)
+ else()
+ # insert an empty value into the cache, indicating the default
+ # should be used (including compatibility vars above)
+ set(KDE_INSTALL_${varname} ""
+ CACHE PATH "${docstring} (${_docpath})")
+ set(KDE_INSTALL_${varname} "${_realpath}")
+ endif()
+
+ mark_as_advanced(KDE_INSTALL_${varname})
+
+ if(NOT IS_ABSOLUTE ${KDE_INSTALL_${varname}})
+ set(KDE_INSTALL_FULL_${varname}
+ "${CMAKE_INSTALL_PREFIX}/${KDE_INSTALL_${varname}}")
+ else()
+ set(KDE_INSTALL_FULL_${varname} "${KDE_INSTALL_${varname}}")
+ endif()
+
+ # Override compatibility vars at runtime, even though we don't touch
+ # them in the cache; this way, we keep the variables in sync where
+ # KDEInstallDirs is included, but don't interfere with, say,
+ # GNUInstallDirs in a parallel part of the CMake tree.
+ if(_cmakename)
+ set(${_cmakename} "${KDE_INSTALL_${varname}}")
+ set(CMAKE_INSTALL_FULL_${varname} "${KDE_INSTALL_FULL_${varname}}")
+ endif()
+
+ if(_oldstylename)
+ set(${_oldstylename} "${KDE_INSTALL_${varname}}")
+ endif()
+endmacro()
+
+# varname: the variable name suffix (eg: BINDIR for KDE_INSTALL_BINDIR)
+# dir: the relative path of the default value of KDE_INSTALL_${varname}
+# relative to CMAKE_INSTALL_PREFIX: no leading /
+# docstring: documentation about the variable (not including the default value)
+# oldstylename (optional): the old-style name of the variable
+macro(_define_absolute varname dir docstring)
+ _define_relative("${varname}" "" "${dir}" "${docstring}" ${ARGN})
+endmacro()
+
+macro(_define_non_cache varname value)
+ set(KDE_INSTALL_${varname} "${value}")
+ if(NOT IS_ABSOLUTE ${KDE_INSTALL_${varname}})
+ set(KDE_INSTALL_FULL_${varname}
+ "${CMAKE_INSTALL_PREFIX}/${KDE_INSTALL_${varname}}")
+ else()
+ set(KDE_INSTALL_FULL_${varname} "${KDE_INSTALL_${varname}}")
+ endif()
+
+ if(NOT KDE_INSTALL_DIRS_NO_CMAKE_VARIABLES)
+ list(FIND _gnu_install_dirs_vars "${varname}" _list_offset)
+ if(NOT KDE_INSTALL_DIRS_NO_DEPRECATED OR NOT _list_offset EQUAL -1)
+ set(CMAKE_INSTALL_${varname} "${KDE_INSTALL_${varname}}")
+ set(CMAKE_INSTALL_FULL_${varname} "${KDE_INSTALL_FULL_${varname}}")
+ endif()
+ endif()
+endmacro()
+
+if(APPLE)
+ _define_absolute(BUNDLEDIR "/Applications/KDE"
+ "application bundles"
+ BUNDLE_INSTALL_DIR)
+endif()
+
+# Only supported since cmake 3.7
+if(CMAKE_INSTALL_PREFIX_INITIALIZED_TO_DEFAULT)
+ set(CMAKE_INSTALL_PREFIX "${ECM_PREFIX}" CACHE PATH "Install path prefix" FORCE)
+endif()
+
+_define_absolute(EXECROOTDIR ""
+ "executables and libraries"
+ EXEC_INSTALL_PREFIX)
+
+_define_relative(BINDIR EXECROOTDIR "bin"
+ "user executables"
+ BIN_INSTALL_DIR)
+_define_relative(SBINDIR EXECROOTDIR "sbin"
+ "system admin executables"
+ SBIN_INSTALL_DIR)
+_define_relative(LIBDIR EXECROOTDIR "${_LIBDIR_DEFAULT}"
+ "object code libraries"
+ LIB_INSTALL_DIR)
+
+if(WIN32)
+ _define_relative(LIBEXECDIR BINDIR ""
+ "executables for internal use by programs and libraries"
+ LIBEXEC_INSTALL_DIR)
+else()
+ _define_relative(LIBEXECDIR LIBDIR "libexec"
+ "executables for internal use by programs and libraries"
+ LIBEXEC_INSTALL_DIR)
+endif()
+
+_define_relative(CMAKEPACKAGEDIR LIBDIR "cmake"
+ "CMake packages, including config files"
+ CMAKECONFIG_INSTALL_PREFIX)
+
+_define_relative(PLUGINDIR QTPLUGINDIR ""
+ "Plugins"
+ PLUGIN_INSTALL_DIR)
+
+_define_absolute(INCLUDEDIR "include"
+ "C and C++ header files"
+ INCLUDE_INSTALL_DIR)
+
+_define_absolute(LOCALSTATEDIR "var"
+ "modifiable single-machine data")
+
+_define_absolute(SHAREDSTATEDIR "com"
+ "modifiable architecture-independent data")
+
+if (WIN32)
+ _define_relative(DATAROOTDIR BINDIR "data"
+ "read-only architecture-independent data root"
+ SHARE_INSTALL_PREFIX)
+else()
+ _define_absolute(DATAROOTDIR "share"
+ "read-only architecture-independent data root"
+ SHARE_INSTALL_PREFIX)
+endif()
+
+_define_relative(DATADIR DATAROOTDIR ""
+ "read-only architecture-independent data"
+ DATA_INSTALL_DIR)
+
+# KDE Framework-specific things
+_define_relative(DOCBUNDLEDIR DATAROOTDIR "doc/HTML"
+ "documentation bundles generated using kdoctools"
+ HTML_INSTALL_DIR)
+_define_relative(KCFGDIR DATAROOTDIR "config.kcfg"
+ "kconfig description files"
+ KCFG_INSTALL_DIR)
+_define_relative(KCONFUPDATEDIR DATAROOTDIR "kconf_update"
+ "kconf_update scripts"
+ KCONF_UPDATE_INSTALL_DIR)
+_define_relative(KAPPTEMPLATESDIR DATAROOTDIR "kdevappwizard/templates"
+ "KAppTemplate and KDevelop templates"
+ KDE_INSTALL_KTEMPLATESDIR
+ )
+_define_relative(KFILETEMPLATESDIR DATAROOTDIR "kdevfiletemplates/templates"
+ "KDevelop file templates")
+_define_relative(JARDIR "" "jar"
+ "Java AAR/JAR files for Android")
+
+
+# Cross-desktop or other system things
+_define_relative(ICONDIR DATAROOTDIR "icons"
+ "icons"
+ ICON_INSTALL_DIR)
+_define_relative(LOCALEDIR DATAROOTDIR "locale"
+ "knotify description files"
+ LOCALE_INSTALL_DIR)
+_define_relative(SOUNDDIR DATAROOTDIR "sounds"
+ "sound files"
+ SOUND_INSTALL_DIR)
+_define_relative(TEMPLATEDIR DATAROOTDIR "templates"
+ "templates"
+ TEMPLATES_INSTALL_DIR)
+_define_relative(WALLPAPERDIR DATAROOTDIR "wallpapers"
+ "desktop wallpaper images"
+ WALLPAPER_INSTALL_DIR)
+_define_relative(APPDIR DATAROOTDIR "applications"
+ "application desktop files"
+ XDG_APPS_INSTALL_DIR)
+_define_relative(DESKTOPDIR DATAROOTDIR "desktop-directories"
+ "desktop directories"
+ XDG_DIRECTORY_INSTALL_DIR)
+_define_relative(MIMEDIR DATAROOTDIR "mime/packages"
+ "mime description files"
+ XDG_MIME_INSTALL_DIR)
+_define_relative(METAINFODIR DATAROOTDIR "metainfo"
+ "AppStream component metadata")
+_define_relative(QCHDIR DATAROOTDIR "doc/qch"
+ "documentation bundles in QCH format")
+_define_relative(MANDIR DATAROOTDIR "man"
+ "man documentation"
+ MAN_INSTALL_DIR)
+_define_relative(INFODIR DATAROOTDIR "info"
+ "info documentation")
+_define_relative(DBUSDIR DATAROOTDIR "dbus-1"
+ "D-Bus")
+_define_relative(DBUSINTERFACEDIR DBUSDIR "interfaces"
+ "D-Bus interfaces"
+ DBUS_INTERFACES_INSTALL_DIR)
+_define_relative(DBUSSERVICEDIR DBUSDIR "services"
+ "D-Bus session services"
+ DBUS_SERVICES_INSTALL_DIR)
+_define_relative(DBUSSYSTEMSERVICEDIR DBUSDIR "system-services"
+ "D-Bus system services"
+ DBUS_SYSTEM_SERVICES_INSTALL_DIR)
+_define_relative(SYSTEMDUNITDIR CMAKE_INSTALL_PREFIX "lib/systemd"
+ "Systemd units"
+ SYSTEMD_UNIT_INSTALL_DIR)
+_define_relative(SYSTEMDUSERUNITDIR SYSTEMDUNITDIR "user"
+ "Systemd user units"
+ SYSTEMD_USER_UNIT_INSTALL_DIR)
+
+
+set(_default_sysconf_dir "etc")
+if (CMAKE_INSTALL_PREFIX STREQUAL "/usr")
+ set(_default_sysconf_dir "/etc")
+endif()
+
+_define_absolute(SYSCONFDIR "${_default_sysconf_dir}"
+ "read-only single-machine data"
+ SYSCONF_INSTALL_DIR)
+_define_relative(CONFDIR SYSCONFDIR "xdg"
+ "application configuration files"
+ CONFIG_INSTALL_DIR)
+_define_relative(AUTOSTARTDIR CONFDIR "autostart"
+ "autostart files"
+ AUTOSTART_INSTALL_DIR)
+
+
+set(_mixed_core_path_styles FALSE)
+if (IS_ABSOLUTE "${KDE_INSTALL_BINDIR}")
+ if (NOT IS_ABSOLUTE "${KDE_INSTALL_LIBDIR}" OR NOT IS_ABSOLUTE "${KDE_INSTALL_INCLUDEDIR}")
+ set(_mixed_core_path_styles )
+ endif()
+else()
+ if (IS_ABSOLUTE "${KDE_INSTALL_LIBDIR}" OR IS_ABSOLUTE "${KDE_INSTALL_INCLUDEDIR}")
+ set(_mixed_core_path_styles TRUE)
+ endif()
+endif()
+if (_mixed_core_path_styles)
+ message(WARNING "KDE_INSTALL_BINDIR, KDE_INSTALL_LIBDIR and KDE_INSTALL_INCLUDEDIR should either all be absolute paths or all be relative paths.")
+endif()
+
+
+set(KDE_INSTALL_TARGETS_DEFAULT_ARGS RUNTIME DESTINATION "${CMAKE_INSTALL_BINDIR}"
+ LIBRARY DESTINATION "${CMAKE_INSTALL_LIBDIR}"
+ ARCHIVE DESTINATION "${CMAKE_INSTALL_LIBDIR}" COMPONENT Devel
+ INCLUDES DESTINATION "${CMAKE_INSTALL_INCLUDEDIR}"
+)
+if(APPLE)
+ set(KDE_INSTALL_TARGETS_DEFAULT_ARGS ${KDE_INSTALL_TARGETS_DEFAULT_ARGS}
+ BUNDLE DESTINATION "${BUNDLE_INSTALL_DIR}" )
+endif()
+
+if(NOT KDE_INSTALL_DIRS_NO_DEPRECATED)
+ set(INSTALL_TARGETS_DEFAULT_ARGS ${KDE_INSTALL_TARGETS_DEFAULT_ARGS})
+endif()
+
+# new in cmake 2.8.9: this is used for all installed files which do not have a component set
+# so set the default component name to the name of the project, if a project name has been set:
+if(NOT "${PROJECT_NAME}" STREQUAL "Project")
+ set(CMAKE_INSTALL_DEFAULT_COMPONENT_NAME "${PROJECT_NAME}")
+endif()
diff --git a/kde-modules/KDESetupPrefixScript.cmake b/kde-modules/KDESetupPrefixScript.cmake
new file mode 100644
index 00000000..31da2683
--- /dev/null
+++ b/kde-modules/KDESetupPrefixScript.cmake
@@ -0,0 +1,27 @@
+# SPDX-FileCopyrightText: 2014-2015 Alex Merry <alex.merry@kde.org>
+# SPDX-FileCopyrightText: 2013 Stephen Kelly <steveire@gmail.com>
+# SPDX-FileCopyrightText: 2012 David Faure <faure@kde.org>
+# SPDX-FileCopyrightText: 2007 Matthias Kretz <kretz@kde.org>
+# SPDX-FileCopyrightText: 2006-2007 Laurent Montel <montel@kde.org>
+# SPDX-FileCopyrightText: 2006-2013 Alex Neundorf <neundorf@kde.org>
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+# Prefix script setup code shared between KDEInstallDirsX.cmake, not public API.
+#
+
+configure_file(${CMAKE_CURRENT_LIST_DIR}/prefix.sh.cmake ${CMAKE_CURRENT_BINARY_DIR}/prefix.sh @ONLY)
+
+find_program(FISH_EXECUTABLE fish)
+if(FISH_EXECUTABLE)
+ configure_file(${CMAKE_CURRENT_LIST_DIR}/prefix.sh.fish.cmake ${CMAKE_CURRENT_BINARY_DIR}/prefix.sh.fish @ONLY)
+endif()
+
+option(KDE_INSTALL_PREFIX_SCRIPT "Installs ${CMAKE_INSTALL_PREFIX}/prefix.sh that sets up the necessary environment variables" OFF)
+if(KDE_INSTALL_PREFIX_SCRIPT)
+ install(FILES ${CMAKE_CURRENT_BINARY_DIR}/prefix.sh DESTINATION ${CMAKE_INSTALL_PREFIX} PERMISSIONS OWNER_EXECUTE OWNER_WRITE OWNER_READ)
+endif()
+
+if(NOT KDE_INSTALL_USE_QT_SYS_PATHS)
+ message("Installing in ${CMAKE_INSTALL_PREFIX}. Run ${CMAKE_CURRENT_BINARY_DIR}/prefix.sh to set the environment for ${CMAKE_PROJECT_NAME}.")
+endif()
diff --git a/modules/QtVersionOption.cmake b/modules/QtVersionOption.cmake
new file mode 100644
index 00000000..1390f9db
--- /dev/null
+++ b/modules/QtVersionOption.cmake
@@ -0,0 +1,38 @@
+#.rst:
+# QtVersionOption
+# ---------------
+#
+# Adds a build option to select the major Qt version if necessary,
+# that is, if the major Qt version has not yet been determined otherwise
+# (e.g. by a corresponding find_package() call).
+#
+# This module is typically included by other modules requiring knowledge
+# about the major Qt version.
+#
+# ``QT_MAJOR_VERSION`` is defined to either be "5" or "6".
+#
+#
+# Since 5.82.0.
+
+#=============================================================================
+# SPDX-FileCopyrightText: 2021 Volker Krause <vkrause@kde.org>
+#
+# SPDX-License-Identifier: BSD-3-Clause
+
+if (DEFINED QT_MAJOR_VERSION)
+ return()
+endif()
+
+if (TARGET Qt5::Core)
+ set(QT_MAJOR_VERSION 5)
+elseif (TARGET Qt6::Core)
+ set(QT_MAJOR_VERSION 6)
+else()
+ option(BUILD_WITH_QT6 "Build against Qt 6" OFF)
+
+ if (BUILD_WITH_QT6)
+ set(QT_MAJOR_VERSION 6)
+ else()
+ set(QT_MAJOR_VERSION 5)
+ endif()
+endif()
generated by cgit v1.2.1 (git 2.18.0) at 2025-11-04 05:38:54 +0000