Copyright (C) 2022  Pasha <pasha@member.fsf.org>

    This program is free software: you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation, either version 3 of the License, or
    (at your option) any later version.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program.  If not, see <https://www.gnu.org/licenses/>.


Debian OpenStack Installer
--------------------------
requirements

1. Install or update to Debian Testing/Bookworm

2. current configuration uses agent networking (bridge).

Therefore, you need two network interfaces with two different network series.

If you are using VM, then you may configure enp1s0 as "bridge network" with your main network.
and enp7s0 as NAT interface.

example:
enp1s0 - static IP: 192.168.0.155
enp7s0 - static IP/DHCP: 192.168.122.10

3. edit openstack_setup.sh and set the following setting:

OPENSTACK_HOST_IP="192.168.0.155"
EXTERNAL_BRIDGE_INTERFACE="enp7s0"

# chmod +x openstack_setup.sh
# ./openstack_setup.sh &> output.txt

check output from another shell
# tail -f output.txt


restart and start exploring openstack on Debian.

You may check "next_step" file.